Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black metal 1U rack PDU with ten NEMA 5-15/20R outlets and hardwired input cord

MINUTEMAN

MINUTEMAN OEPD1020HV-HW 10-Outlet PDU 20A Hardwired 120V 1U/0U

SKU CH-JX3J-MGQ01 MPN OEPD1020HV-HW

Distributes 120 V power to ten NEMA 5-15/20R outlets via a 20 A hardwired input with a 15 ft cord in a 1U or 0U rack-mountable chassis

  • Rack Size1U
  • StyleHorizontal Installation, 0U Vertical Installation
  • Maximum Input Current20A
  • Input Connector(s)Hardwire
  • Cord Length15 ft
  • Output Connector(s)(2) 5-15/20R, (8) 5-15/20R

Model OEPD1020HV-HW

Zobrazit dalších 8 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 10 outlets support dense rack deployments
  • 20 A hardwired input delivers reliable high-current power
  • 15 ft cord enables flexible routing to distant panels
  • 1U or 0U mounting fits horizontal and vertical orientations
  • mixed NEMA 5-15/20R receptacles accept standard and locking plugs

10-Outlet Hardwired PDU for Rack Mounting

The MINUTEMAN OEPD1020HV-HW distributes 120 V AC power through ten NEMA 5-15/20R receptacles, split into two front and eight rear outlets. It accepts a hardwired 20 A feed via a 15 ft supply cord and fits either a 1U horizontal slot or a 0U vertical channel. This unit suits installers who need permanent, high-density power in a standard rack without a plug-in cord.

Sustained 20 A Delivery Across All Outlets

The PDU is rated for a continuous 20 A input, so the full complement of outlets can carry load simultaneously without tripping an internal breaker. Hardwired input eliminates the contact resistance of a plug connection, reducing voltage drop during extended runs. The 15 ft cord allows the feed point to reach distant panels while keeping slack out of the airflow path.

Dual-Orientation Mounting With Included Bracket

A supplied stand-off bracket lets the same chassis mount horizontally in 1U or vertically in 0U space, so the installer chooses orientation on site. Hardwiring requires a qualified electrician to terminate the supply conductors, which is the only step that commonly delays deployment. No software configuration or network setup is needed for basic power distribution.

Přednosti

  • 10 outlets support dense rack deployments
  • 20 A hardwired input delivers reliable high-current power
  • 15 ft cord enables flexible routing to distant panels
  • 1U or 0U mounting fits horizontal and vertical orientations
  • mixed NEMA 5-15/20R receptacles accept standard and locking plugs

Specifikace

BrandMINUTEMAN
SeriesOE Series
ModelOEPD1020HV-HW
Rack Size1U
StyleHorizontal Installation, 0U Vertical Installation
Maximum Input Current20A
Input Connector(s)Hardwire
Cord Length15 ft
Output Connector(s)(2) 5-15/20R, (8) 5-15/20R
FeaturesLonger power cords
Most Minuteman PDU units have up to 15-ft power cords, to allow for seamless installations
More standard outlets
Minuteman PDU units have 6, 8, 10, 14, 18, or 24 outlets. Most of the Minuteman PDUs have additional front outlets for improved access
Configuration versatility
Minuteman PDU units have a multi-form factor with 1U and 0U configurations allowing for either horizontal or vertical placement. 1U products ship with a stand-off mounting bracket, at no additional cost, that allows for vertical installation on most racks and enclosures
Locking (L) and Hardwire (
Přepravní hmotnost2.48 kg
Rozměry balení432 × 89 × 44 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much heat or noise does the OEPD1020HV-HW produce when running at its 20 A rating all day?

The unit is a passive power distribution strip with no fans or active cooling, so it generates no audible noise and only minimal warmth from the conductors carrying up to 20 A at 120 V.

What must already be in place for the hardwired input on this PDU to work?

A dedicated 20 A, 120 V branch circuit with a suitable junction box and wiring rated for the load, ready for permanent hardwire connection of the 15 ft supply cable.

Will the ten NEMA 5-15/20R outlets on this PDU accept the older 5-15P plugs on my existing rack gear?

Yes, each 5-15/20R receptacle accepts both standard 5-15P and 5-20P plugs, so legacy 15 A equipment connects directly without adapters.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.