Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Vertical black metal PDU with 24 front outlets and LCD screen

MINUTEMAN

MINUTEMAN RPM2024N1LCD-IEC PDU 24-Outlet Switched IEC 0U Vertical Rack-mountable

SKU CH-YEZ9-XXD08 MPN RPM2024N1LCD-IEC

Switched PDU with 24 NEMA 5-15/20R outlets, IEC input, 10 ft cord, 20 A capacity, and LCD for local monitoring

  • TypePower Distribution Units
  • Style0U Vertical Installation
  • Certifications62368-1 Certification
  • Maximum Input Current20A
  • Input Connector(s)IEC
  • Cord Length10 ft

Model RPM2024N1LCD-IEC

Zobrazit dalších 30 konfigurací
  • Remote power control via built-in web server and SNMP
  • 24 switched NEMA 5-15/20R outlets for dense rack deployments
  • 0U vertical form factor preserves rack space
  • Local LCD shows amps, IP, temperature and humidity
  • 62368-1 certified with 20 A input circuit breaker protection

24-Outlet Switched Vertical PDU

The Minuteman RPM2024N1LCD-IEC is a 0U vertical rack-mountable power distribution unit with 24 front-panel 5-15/20R receptacles. It delivers a maximum input and output current of 20A through an IEC inlet on a 10 ft cord. An integrated LCD shows real-time amperage, IP address, temperature and humidity readings for immediate local visibility.

Upgrade from Basic Unmanaged Strips

This unit replaces non-networked power strips that require physical access to reboot equipment. The jump is worth it when administrators need IP-addressable outlet-level control, power sequencing and scheduled reboots without visiting the rack. Built-in web server, SNMP traps and email alerts enable remote troubleshooting from any browser or management console.

Check Rack Space and Network Readiness

Verify the enclosure has a 0U vertical mounting channel and that the 10 ft IEC cord reaches your upstream power source. Ensure a 10/100 Base-T Ethernet drop is available for the RJ-45 management port and that your monitoring stack can consume SNMP v1/v2c/v3 traps or syslog messages. Confirm the 20A branch circuit matches the PDU's input breaker rating.

Přednosti

  • Remote power control via built-in web server and SNMP
  • 24 switched NEMA 5-15/20R outlets for dense rack deployments
  • 0U vertical form factor preserves rack space
  • Local LCD shows amps, IP, temperature and humidity
  • 62368-1 certified with 20 A input circuit breaker protection

Specifikace

BrandMINUTEMAN
ModelRPM2024N1LCD-IEC
TypePower Distribution Units
Style0U Vertical Installation
Certifications62368-1 Certification
Maximum Input Current20A
Input Connector(s)IEC
Cord Length10 ft
Output Connector(s)Front Panel Receptacles: (24) 5-15/20R
Maximum Output Current20A
Overload ProtectionInput Circuit Breaker Protection
FeaturesIP-addressable Remote Power Manager
Built-in Web Server to support Remote Power Management
Event Notifications via Email or SNMP Traps
Local LCD displays Amps, IP Address, Temperature and/or Humidity
Daily, Weekly, Monthly & Yearly Power Consumption Data
10/100 Base-T Ethernet Port
IPv4, IPv6 Support and SNMP Support (v1,v2c,v3)
Telnet, SSH Encryption Support
Radius Authentication
User Account for Three Different Permissions Management Systems
Alarm Notification via Email, SNMP, Syslog, LED or Audible Alarm
SSL Web Browser for Set Up and Operation
IP Address Filtering
Maximum 5,000 E
Přepravní hmotnost7.26 kg
Rozměry balení1890 × 221 × 109 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What rack space does the 0U vertical 24-outlet PDU require?

The 0U vertical design mounts in the zero-U side channels of a standard rack, leaving all 1U–45U positions free for servers or switches.

How is the 10 ft IEC input cord connected to a 20 A branch circuit, and what step is often missed?

Plug the IEC cord into a 20 A IEC receptacle or hard-wire to a 20 A breaker; the step often missed is configuring the 10/100 Base-T Ethernet port and IP settings before applying load.

When should the input circuit-breaker be inspected or replaced on a 20 A switched PDU?

Inspect the breaker after any overload trip or at yearly maintenance intervals; replace it if it fails to hold 20 A continuously or shows physical damage.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.