Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Twelve bare green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5 4800 CL40 2Rx4 ECC RDIMM Kit

SKU CH-6JJZ-2VM80

1.1 TB DDR5 server memory kit with twelve 96 GB ECC registered RDIMMs at 4800 MT/s CL40, validated for ASRock Rack GENOAD12M3-2Q

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Zobrazit dalších 4 konfigurací
  • Massive 1.1TB capacity from twelve 96GB modules
  • DDR5 4800 speed with CL40 latency for responsive server performance
  • Registered ECC design prevents data corruption under heavy workloads
  • 2Rx4 organisation and 1.10V voltage match motherboard memory-controller requirements
  • Validated for ASRock Rack GENOAD12M3-2Q with 288-pin RDIMM form factor

Exact DDR5 server kit for ASRock Rack GENOAD12M3-2Q

This NEMIX RAM kit delivers 1.1TB of DDR5 4800 registered ECC memory in twelve 96GB modules. It is built for administrators who need maximum capacity on the named motherboard and require registered DIMMs with error correction for production workloads.

Registered 2Rx4 DDR5-4800 at 1.10V CL40

The modules run at DDR5 4800 (PC5-38400) with a CAS latency of 40 and 1.10V operation. The 2Rx4 registered architecture is the single specification that determines whether the motherboard will recognise every slot at full speed; a UDIMM or different rank will not work.

288-pin RDIMM installation follows the board manual

Each module uses the standard 288-pin RDIMM form factor and must be populated in the exact order the ASRock Rack manual specifies. The most common issue is inserting DIMMs in the wrong sequence or mixing ranks, which prevents the system from booting or seeing the full 1.1TB.

Přednosti

  • Massive 1.1TB capacity from twelve 96GB modules
  • DDR5 4800 speed with CL40 latency for responsive server performance
  • Registered ECC design prevents data corruption under heavy workloads
  • 2Rx4 organisation and 1.10V voltage match motherboard memory-controller requirements
  • Validated for ASRock Rack GENOAD12M3-2Q with 288-pin RDIMM form factor

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock Rack
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the 1.1 TB capacity mean when all twelve 96 GB modules are installed in a compatible server?

The kit provides a total of 1.1 TB of DDR5 memory across twelve 96 GB RDIMMs, allowing the ASRock Rack GENOAD12M3-2Q to recognise the full capacity and run at the rated 4800 MT/s speed when populated according to the board's memory rules.

How does the DDR5 4800 PC5-38400 interface limit real-world throughput in this registered ECC configuration?

The DDR5 4800 PC5-38400 interface sets a maximum data rate of 4800 MT/s per module, so aggregate bandwidth is capped by the memory controller and the number of populated channels on the ASRock Rack GENOAD12M3-2Q motherboard.

What physical slot and clearance requirements must the chassis meet for these 288-pin RDIMMs?

Each module uses the standard 288-pin DDR5 RDIMM form factor and has no heat spreader, so the server must provide twelve DDR5 RDIMM slots with enough vertical clearance for bare modules and follow the motherboard's prescribed population order.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.