Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 1.5TB (12 x 128GB) DDR4 2933MHz PC4-23400 4Rx4 ECC LRDIMM server RAM

SKU CH-T1G8-EDREJ

A 1.5 TB DDR4 server memory kit with twelve 128 GB load-reduced ECC modules running at 2933 MHz

  • Capacity1.5TB (12 x 128GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 5TB total capacity enables large-scale virtualization and in-memory databases with 12 modules of 128GB each
  • DDR4 2933MHz speed delivers high throughput for demanding server workloads at PC4-23400 rating
  • ECC and load-reduced design maintains data integrity while reducing electrical load on the memory controller
  • 4Rx4 organization maximizes density per DIMM for efficient use of 288-pin server slots
  • 2V operation lowers power consumption across the full 12-module kit

Capacity and Configuration

This NEMIX RAM kit delivers 1.5TB of DDR4 server memory across twelve 128GB modules. It is built for enterprise platforms that require Load Reduced DIMMs with ECC error correction.

Suitable Systems and Limitations

The kit suits servers validated for DDR4 2933MHz PC4-23400 LRDIMMs with 4Rx4 organisation and 1.2V operation. It is not for desktop PCs, workstations that only accept standard RDIMMs, or platforms limited to lower densities or ranks.

Deciding Specification

The 4Rx4 Load Reduced architecture is the single specification that determines compatibility; only motherboards and memory controllers qualified for this rank and buffer type will recognise and run the full 1.5TB capacity.

Přednosti

  • 5TB total capacity enables large-scale virtualization and in-memory databases with 12 modules of 128GB each
  • DDR4 2933MHz speed delivers high throughput for demanding server workloads at PC4-23400 rating
  • ECC and load-reduced design maintains data integrity while reducing electrical load on the memory controller
  • 4Rx4 organization maximizes density per DIMM for efficient use of 288-pin server slots
  • 2V operation lowers power consumption across the full 12-module kit

Specifikace

BrandNEMIX RAM
ModelPart#: ML23400-744K12-SM-SYS-1029U-TN10RT
Part NumberPart#: ML23400-744K12-SM-SYS-1029U-TN10RT
Capacity1.5TB (12 x 128GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

Otázky k tomuto produktu

How does the 2933 MHz speed affect real server performance?

The modules run at DDR4 2933 (PC4-23400) with CL21 latency. Load Reduced DIMM architecture lowers electrical load on the memory controller, allowing all twelve 128 GB modules to operate at rated speed in supported platforms.

What does the PC4-23400 rating cap in practice?

PC4-23400 defines a peak transfer rate of 23 400 MB/s per module. Actual throughput depends on the server memory controller and channel population, but the kit is validated for DDR4 2933 operation at 1.2 V.

Will these 288-pin LRDIMMs fit my server memory slots?

Each module uses the standard 288-pin DDR4 LRDIMM form factor. They require server motherboards with DDR4 LRDIMM slots that support 4Rx4 128 GB density and 1.2 V operation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.