Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 ECC RDIMM CL46 Supermicro X14SRA-F memory upgrade

SKU CH-X77A-R11VW

128 GB DDR5-5600 registered ECC kit in four 32 GB modules at CL46 and 1.1 V for the Supermicro X14SRA-F

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Zobrazit dalších 4 konfigurací
  • 128 GB kit installs as four 32 GB modules for full server capacity
  • DDR5 5600 speed runs at the rated frequency your motherboard expects
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • CL46 latency at 1.1 V matches the controller timing for stable operation
  • 288-pin RDIMM form factor fits the Supermicro X14SRA-F memory slots exactly

128 GB DDR5 5600 ECC RDIMM Kit

This 128 GB kit contains four 32 GB DDR5 5600 registered ECC RDIMMs built for the Supermicro X14SRA-F motherboard. The modules run at 1.1 V with CL46 latency and a 2Rx8 organisation. Registered buffering and on-die ECC protect data integrity in continuously running server workloads.

Suited for X14SRA-F memory expansion.

The kit matches the X14SRA-F's 288-pin RDIMM requirement and population rules, so every slot can be filled at the rated speed. Builders whose board accepts only unbuffered UDIMMs or laptop-style SODIMMs cannot use these modules. Systems that demand a different voltage, rank layout or DDR generation must choose other memory.

Registered ECC RDIMM form factor decides fit

The 288-pin registered DIMM with ECC is the single specification the X14SRA-F memory controller expects. If the motherboard manual calls for UDIMM, SODIMM or non-ECC memory, this kit will not be recognised or will not seat. Verify the board's qualified-vendor list before ordering.

Přednosti

  • 128 GB kit installs as four 32 GB modules for full server capacity
  • DDR5 5600 speed runs at the rated frequency your motherboard expects
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • CL46 latency at 1.1 V matches the controller timing for stable operation
  • 288-pin RDIMM form factor fits the Supermicro X14SRA-F memory slots exactly

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the 288-pin DDR5 RDIMM modules into the Supermicro X14SRA-F and which population order does the board require?

Power down the server, open the chassis, and insert each 32 GB RDIMM into the slots specified by the Supermicro X14SRA-F manual for a four-module configuration; the 288-pin DDR5 keying prevents mis-insertion, but only the board's documented population order guarantees 128 GB at 5600 MT/s.

Will the ECC Registered RDIMM kit need any firmware updates or scheduled component replacements during its service life?

No firmware updates are required for the memory modules themselves; ECC corrects single-bit errors on the fly and the registered design offloads the memory controller, so the kit runs for the server's lifetime without planned replacement.

What thermal or electrical limit appears first when all four 2Rx8 RDIMMs run continuously at 5600 MT/s and 1.10 V?

The DDR5 5600 (PC5-44800) JEDEC voltage ceiling of 1.10 V is the first fixed limit; sustained full-speed operation stays within this spec, and the registered buffer keeps signal integrity stable across all populated slots.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.