Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2133 CL15 SODIMM kit for POSIFLEX XT-6315

SKU CH-QBX5-T1A8Z

A 16 GB DDR4 SODIMM kit running at 2133 MHz CL15, built for the POSIFLEX XT-6315 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit upgrades POS terminal speed
  • CL15 latency keeps data flow responsive
  • 2 V operation reduces power draw
  • 260-pin SODIMM fits XT-6315 slot
  • Samsung Micron Hynix chips ensure reliability

Kit details

This 16 GB kit contains two 8 GB DDR4 SODIMM modules rated at 2133 MHz with CL15 latency. It is built for the POSIFLEX XT-6315 JIVA fanless POS terminal and runs at the standard 1.2 V DDR4 voltage.

Compatibility focus

The modules are validated for the specific terminal model and chipset, removing the guesswork of generic memory selection. Using major OEM chips from Samsung Micron or Hynix ensures the electrical characteristics match the platform requirements.

Installation notes

The 260-pin unbuffered non-ECC SODIMMs install in the terminal's memory slots without tools. The fanless chassis can make access tight so refer to the terminal service manual for the exact cover removal steps before starting.

Přednosti

  • 16 GB kit upgrades POS terminal speed
  • CL15 latency keeps data flow responsive
  • 2 V operation reduces power draw
  • 260-pin SODIMM fits XT-6315 slot
  • Samsung Micron Hynix chips ensure reliability

Specifikace

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

Otázky k tomuto produktu

Will the 2Rx8 modules need any replacement in the POSIFLEX XT-6315?

The kit uses major OEM chips rated for DDR4 2133 at 1.20 V with CL15 timing. No maintenance is required; the modules are designed to run for the life of the terminal.

What limit appears first under sustained load in the fanless terminal?

Without a heat spreader the memory relies on case airflow, so thermal throttling of the Celeron chipset will be reached before the RAM hits its own limits.

How much heat and power does the 1.2 V kit add inside a fanless POS terminal running all day?

Each 8 GB stick runs at 1.20 V DDR4 2133, so the pair draws minimal power and adds very little heat to the sealed chassis.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.