BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277074BTC
Skladem
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 260-PIN SODIMM Kit for POSIFLEX XT-3817-G2 JIVA Foldable 17 Terminal
A 16 GB DDR4 SODIMM kit running at 3200 MHz CL22, built for the POSIFLEX XT-3817-G2 JIVA Foldable 17 terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking on POS terminals
- DDR4 3200 MT/s speed matches system specification
- CL22 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits the XT-3817-G2 JIVA 17 slot
- Major OEM chips tested under load for stable operation
DDR4 SODIMM kit for POSIFLEX XT-3817-G2
This NEMIX RAM kit delivers 16GB across two 8GB modules built for the POSIFLEX XT-3817-G2 JIVA Foldable 17 terminal. It runs at DDR4 3200 with CL22 latency and 1.20V operation. The unbuffered non-ECC design suits point-of-sale workloads that need reliable memory upgrades.
Verify SODIMM slots and voltage before ordering
Confirm the terminal accepts 260-pin DDR4 SODIMM modules and has two free slots for the dual-channel kit. The system must support 1.2V DDR4 3200 speeds and unbuffered non-ECC memory. Check the service manual for maximum capacity per slot and any BIOS restrictions.
Low-voltage modules run cool without spreaders
Operating at 1.20V, these 2Rx8 modules generate minimal heat during continuous terminal operation. No heat spreaders are fitted, keeping the profile thin for tight SODIMM sockets. Expect silent passive cooling with typical POS workloads and no added power draw beyond the rated voltage.
Přednosti
- 16 GB dual-channel kit boosts multitasking on POS terminals
- DDR4 3200 MT/s speed matches system specification
- CL22 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits the XT-3817-G2 JIVA 17 slot
- Major OEM chips tested under load for stable operation
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
Otázky k tomuto produktu
Does the kit include both 8 GB modules or do I need to buy a second stick separately?
The kit contains two 8 GB SODIMMs for a total of 16 GB, so no additional modules are required.
How do I choose between the 3200 MHz CL22 specification and other speed or latency options?
This kit is a single 3200 MHz CL22 configuration validated for the POSIFLEX XT-3817-G2 JIVA Foldable 17 terminal; select it when your system calls for DDR4 3200 non-ECC unbuffered memory.
Will the advertised 3200 MHz speed actually run at that rate once installed in the terminal?
The modules are rated at 3200 MHz (PC4-25600) and will operate at that speed provided the terminal's memory controller supports DDR4 3200.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
