Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR5 SODIMM sticks, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR5 4800 SODIMM memory upgrade for SuperMicro SYS-E100-13AD-C CSE-E101-04 X13SAN-C

SKU CH-7BSD-4KXNR

A 16GB kit of two 8GB DDR5 4800 SODIMM modules at 1.1V, CL40, non-ECC, unbuffered, validated for SuperMicro SYS-E100-13AD-C, CSE-E101-04 and X13SAN-C systems

  • Capacity16GB (2 x 8GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 4800 MT/s speed matches platform spec
  • 10 V operation keeps power draw low
  • 262-pin SODIMM form factor fits SuperMicro IoT SuperServer
  • CL40 latency tuned for stable unbuffered operation

16GB DDR5 4800 SODIMM kit

This kit provides 16GB of DDR5 memory in a matched pair of 8GB modules. It is built for the SuperMicro SYS-E100-13AD-C and CSE-E101-04 platforms. The 262-pin SODIMM form factor fits compact server and workstation boards. Non-ECC unbuffered operation suits systems that do not require error correction.

Verify DDR5 SODIMM support

Confirm the target board accepts DDR5 SODIMMs at 1.1V before ordering. The memory runs at 4800 MT/s with CL40 latency and a 1Rx8 organisation. Check that the BIOS recognises PC5-38400 speed and that the chassis has clearance for modules without heat spreaders. No ECC or registered buffering is present on these sticks.

Steady throughput under load

Modules are stress tested at full rated speed to maintain stability during extended workloads. The 1.1V operating voltage helps limit thermal output in dense enclosures. Samsung, Micron or Hynix DRAM chips supply consistent bandwidth for sustained compute tasks. Unbuffered design keeps latency predictable for long-running server applications.

Přednosti

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 4800 MT/s speed matches platform spec
  • 10 V operation keeps power draw low
  • 262-pin SODIMM form factor fits SuperMicro IoT SuperServer
  • CL40 latency tuned for stable unbuffered operation

Specifikace

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR5 4800MHZ PC5-38400 1Rx6 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT

Otázky k tomuto produktu

Does the kit include both SODIMMs or do I need to buy a second 8 GB module?

The kit ships as two 8 GB DDR5 4800 SODIMMs, giving 16 GB total with nothing else to purchase.

Should I choose the CL40 4800 MT/s kit or a different speed grade for the SYS-E100-13AD-C?

The SuperMicro SYS-E100-13AD-C is validated for DDR5 4800 CL40 1.10 V 1Rx8 modules, so this exact kit matches the platform spec.

What does the 4800 MT/s rating mean once the modules are installed in the SuperServer?

The memory will run at 4800 MT/s with CL40 latency at 1.10 V, delivering the bandwidth and timing the platform expects.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.