BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276732BTC
Skladem
NEMIX RAM
NEMIX RAM 16GB DDR3 1866MHz 1.35V 204-Pin SODIMM for Apple iMac Late 2015 27" Retina 5K memory upgrade
A 16 GB DDR3 SODIMM running at 1866 MHz and 1.35 V for upgrading the 27-inch iMac Retina 5K from late 2015
- Capacity16GB
- SpeedDDR3 1866 (PC3 14900)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
- 16GB capacity expands multitasking headroom on 27" iMac
- DDR3 1866MHz speed matches Late 2015 factory spec
- 35V low voltage reduces power draw and heat
- 204-pin SODIMM form factor fits Apple iMac memory slots
- CL13 CAS latency supports responsive system operation
16GB DDR3 1866MHz SODIMM for 27" iMac Late 2015
This 16GB module is built specifically for the Apple iMac Late 2015 27-inch Retina 5K. It runs at 1866MHz (PC3-14900) with a low 1.35V voltage and CL13 latency. The 204-pin unbuffered non-ECC design matches the factory specification for this all-in-one desktop.
Suits owners upgrading a compatible 27-inch iMac
The stick fits the single SODIMM slot in the Late 2015 27-inch Retina 5K iMac. It uses major-brand Samsung, Micron or Hynix chips and is rigorously stress-tested. Buyers with different Apple models, Windows laptops, or desktops requiring other DDR generations should look elsewhere because the pin layout, voltage, and generation will not match.
204-pin DDR3 SODIMM form factor decides fit
Only systems accepting 204-pin DDR3 SODIMM modules at 1.35V can use this memory. The physical notch position and electrical signalling are fixed by the DDR3 standard, so any machine needing a different pin count or voltage will reject the module. Verify the exact model identifier before ordering.
Přednosti
- 16GB capacity expands multitasking headroom on 27" iMac
- DDR3 1866MHz speed matches Late 2015 factory spec
- 35V low voltage reduces power draw and heat
- 204-pin SODIMM form factor fits Apple iMac memory slots
- CL13 CAS latency supports responsive system operation
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | Apple iMac/Mac Mini Compatible Series Memory |
| Model | Apple DDR3 1866MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS14900-628LK1 |
| Capacity | 16GB |
| Speed | DDR3 1866 (PC3 14900) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Apple |
| CAS Latency | CL13 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR3 1866MHZ PC3-14900 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Otázky k tomuto produktu
Does this 204-pin DDR3 SODIMM fit the memory slot of an iMac Late 2015 27" Retina 5K?
Yes — the module is built to the 204-pin DDR3 SODIMM form factor that the iMac Late 2015 27" Retina 5K uses for memory upgrades.
Can I keep the original 1866 MHz modules and add this 16 GB stick without speed mismatch?
The stick runs at DDR3 1866 (PC3-14900) with CL13 latency, matching the factory memory speed so the system will operate all modules at the same rate.
After installation, how do I confirm the Mac recognises the full 16 GB at 1866 MHz?
Open About This Mac → System Report → Memory; you should see a 16 GB DDR3 module listed at 1866 MHz with 1.35 V voltage.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
