Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 1Rx8 1.2V 288-Pin UDIMM memory upgrade

SKU CH-KCA3-YCWPP

16 GB DDR4 2666 CL19 1Rx8 UDIMM adds responsive capacity to compatible Samsung desktops

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands desktop multitasking headroom
  • DDR4 2666 speed matches PC4-21300 bandwidth rating
  • CL19 latency at 1.2 V keeps power draw low
  • 1Rx8 single-rank layout simplifies motherboard compatibility
  • 288-pin UDIMM form factor fits standard desktop DIMM slots

Samsung-compatible 16GB DDR4 2666 UDIMM

This NEMIX RAM module delivers 16GB of DDR4 memory at 2666MHz with CL19 latency. It uses a 1Rx8 unbuffered, non-ECC design and runs at 1.20V. The 288-pin UDIMM form factor fits standard desktop DIMM slots. It is built with Samsung, Micron, or Hynix components and validated for Samsung desktop systems.

Suits Samsung desktop owners needing a single 16GB

Buyers upgrading a compatible Samsung desktop PC will find this module matches the M378A2G43MX3-CTD specification. Systems requiring ECC error correction or registered memory cannot use this unbuffered non-ECC stick. Builders needing DDR5 speeds or capacities beyond 16GB per module should select a different memory type.

2666MHz DDR4 speed with CL19 timing

The module operates at DDR4 2666 (PC4-21300) with a CAS latency of 19. This speed and timing combination determines whether the memory matches the motherboard's supported specification. Verify that your Samsung system accepts DDR4 2666 CL19 unbuffered UDIMMs before purchase.

Přednosti

  • 16 GB capacity expands desktop multitasking headroom
  • DDR4 2666 speed matches PC4-21300 bandwidth rating
  • CL19 latency at 1.2 V keeps power draw low
  • 1Rx8 single-rank layout simplifies motherboard compatibility
  • 288-pin UDIMM form factor fits standard desktop DIMM slots

Specifikace

BrandNEMIX RAM
SeriesSamsung Desktop PC Compatible Series Memory
ModelSamsung DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD21300-618K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSamsung
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM

Otázky k tomuto produktu

What motherboard slot does this 288-Pin DDR4 UDIMM require?

It fits a standard desktop DDR4 DIMM slot keyed for 288 pins; the board must accept unbuffered non-ECC modules at 1.2 V.

Can I keep my current Samsung DDR4 modules while adding this 1Rx8 stick?

Yes, it is built to match Samsung M378A2G43MX3-CTD specifications so it will operate alongside identical-speed Samsung DDR4 DIMMs.

How do I verify the CL19 2666 MT/s timing is active after install?

Open BIOS or a tool such as CPU-Z and confirm the memory reports 2666 MT/s, CAS 19, 1.20 V and single-rank 1Rx8 organisation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.