BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278954BTC
Skladem
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 1.2V 288-Pin UDIMM Supermicro MEM-DR416LD-UN32 desktop RAM
16 GB DDR4 3200 CL22 1.2 V 288-pin UDIMM desktop memory for Supermicro MEM-DR416LD-UN32 compatible systems
- Capacity16GB
- Type288-pin DDR4 UDIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 16 GB DDR4 3200 boosts desktop responsiveness
- CL22 latency at 1.2 V keeps power draw low
- 288-pin UDIMM fits standard desktop DIMM slots
- Dual-rank 2Rx8 organisation increases memory density
- Built with Samsung, Micron or Hynix chips for reliability
16 GB DDR4 3200 UDIMM for desktop upgrades
This 16 GB DDR4 module runs at 3200 MHz with CL22 latency and 1.20 V operation. It is built as a 288-pin unbuffered non-ECC UDIMM using major OEM chips from Samsung Micron or Hynix. The stick targets desktop PCs and workstations that accept standard DDR4 memory.
No heat spreader means low profile fits tight slots
The bare circuit board has no heat spreader so it sits flush in crowded motherboards or small form factor cases. Standard 288-pin DDR4 keying ensures it seats in any desktop DDR4 slot without adapters. Unbuffered design keeps latency low for typical client workloads.
Verify motherboard supports DDR4 3200 non-ECC
Check that your board lists DDR4 3200 PC4-25600 non-ECC unbuffered UDIMMs in its qualified vendor list. Confirm the CPU memory controller can handle 3200 MT/s at 1.20 V without manual voltage changes. Ensure an empty 288-pin slot is available for the single 16 GB module.
Přednosti
- 16 GB DDR4 3200 boosts desktop responsiveness
- CL22 latency at 1.2 V keeps power draw low
- 288-pin UDIMM fits standard desktop DIMM slots
- Dual-rank 2Rx8 organisation increases memory density
- Built with Samsung, Micron or Hynix chips for reliability
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | Supermicro MEM-DR416LD-UN32 Compatible Series memory |
| Part Number | MD25600-628K1 |
| Capacity | 16GB |
| Type | 288-pin DDR4 UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Otázky k tomuto produktu
What speed does the DDR4 3200 interface cap at in practice?
The DDR4 3200 interface runs at up to 3200 MT/s, delivering PC4-25600 bandwidth when the motherboard supports that data rate.
What physical slot and clearance does the 288-pin UDIMM need to fit?
It requires a standard 288-pin DDR4 UDIMM slot; the module has no heat spreader, so it fits under most CPU coolers without height issues.
How is the module installed, and what step do people often miss?
Align the notch with the slot key, press firmly until both retention clips click shut, then verify the BIOS reports 16 GB at 3200 MT/s.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
