Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green DDR4 RDIMM circuit board with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM CL22 1.2V 2Rx8 288-pin ASRock Rack ROMED8-2T AMD EPYC memory upgrade

SKU CH-AQ17-DKPB3

16 GB DDR4 3200 ECC registered RDIMM, CL22 1.20 V, 2Rx8 288-pin for ASRock Rack ROMED8-2T EPYC systems

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 16GB

Zobrazit dalších 4 konfigurací
  • 16 GB DDR4 3200 ECC RDIMM for ASRock Rack ROMED8-2T EPYC servers
  • Registered 2Rx8 design at 1.2 V keeps data integrity under load
  • CL22 latency at PC4-25600 speed balances throughput and stability
  • 288-pin module fits the board without adapters or extra cabling
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise-grade reliability

Server Memory Upgrade

This 16GB DDR4 module is built for the ASRock Rack ROMED8-2T motherboard supporting AMD EPYC processors. It delivers registered ECC reliability at 3200MHz with a CL22 latency. The single 288-pin RDIMM uses 2Rx8 organisation and runs at 1.2V. It is designed to expand server memory capacity with enterprise-grade stability.

Compatibility Constraints

Suitable for administrators upgrading the specified ASRock Rack platform where registered ECC DDR4 is required. Not suitable for systems that accept only unbuffered non-ECC UDIMMs or that lack support for registered modules. Buyers needing higher densities per slot or different form factors must verify motherboard qualification lists before purchase.

Decisive Specification

The registered ECC RDIMM format is the single attribute that determines fit. Only motherboards qualified for DDR4 288-pin registered memory with ECC can use this module. Confirm the ROMED8-2T memory QVL matches this part number before ordering.

Přednosti

  • 16 GB DDR4 3200 ECC RDIMM for ASRock Rack ROMED8-2T EPYC servers
  • Registered 2Rx8 design at 1.2 V keeps data integrity under load
  • CL22 latency at PC4-25600 speed balances throughput and stability
  • 288-pin module fits the board without adapters or extra cabling
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise-grade reliability

Specifikace

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How does the 2Rx8 rank configuration affect sustained throughput on the ASRock Rack ROMED8-2T?

The dual-rank 2Rx8 organisation allows the memory controller to interleave accesses across two ranks per channel, improving bandwidth utilisation during long-running workloads on the EPYC platform.

What thermal behaviour should I expect from the 1.2 V DDR4 modules when the server runs continuously?

Operating at 1.2 V without a heat spreader, the RDIMMs rely on chassis airflow across the 288-pin slots; registered buffering reduces electrical load, keeping temperatures within normal server limits.

Which motherboard feature must be present for this ECC RDIMM to function?

The ASRock Rack ROMED8-2T must provide registered DIMM slots with ECC support for the DDR4 3200 CL22 modules to operate correctly.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.