Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, no heat spreader, 288 gold contacts, DDR4 server RDIMM

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM CL22 Gigabyte MZ32-AR0

SKU CH-8DWP-JBBAR

16 GB DDR4-3200 ECC registered DIMM, CL22, 1.2 V, validated for Gigabyte MZ32-AR0 EPYC motherboards

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • 3200 MHz DDR4 speed handles demanding server applications
  • Registered design stabilises signal integrity on Gigabyte MZ32-AR0
  • 2 V operation reduces power draw in dense configurations
  • 2Rx8 organisation maximises capacity per 288-pin module

Server-grade DDR4 module

This 16GB DDR4 3200 ECC RDIMM is built for Gigabyte MZ32-AR0 motherboards running AMD EPYC processors. Registered buffering and error-correcting code protect data integrity in multi-socket server workloads.

Registered 288-pin form factor

The module uses a standard 288-pin RDIMM layout with 2Rx8 organisation and no heat spreader. Registered signalling reduces electrical load on the memory controller, allowing higher capacities per channel in dense server chassis.

Low-voltage DDR4 operation

Rated at 1.20V with CL22 latency, the stick draws minimal power while maintaining 3200 MT/s throughput. Passive cooling is sufficient in typical server airflow, keeping acoustics low in rack environments.

Přednosti

  • ECC protection prevents data corruption in critical workloads
  • 3200 MHz DDR4 speed handles demanding server applications
  • Registered design stabilises signal integrity on Gigabyte MZ32-AR0
  • 2 V operation reduces power draw in dense configurations
  • 2Rx8 organisation maximises capacity per 288-pin module

Specifikace

BrandNEMIX RAM
SeriesGigabyte Server Motherboard Compatible Series Memory
ModelGigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemGigabyte
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

What throughput ceiling does the DDR4 3200 PC4-25600 interface impose on this module?

The DDR4 3200 PC4-25600 standard sets the peak transfer rate at 25600 MB/s, which is the practical ceiling for this 16 GB 2Rx8 module.

What physical slot and clearance does the 288-pin RDIMM need on the Gigabyte MZ32-AR0?

It requires a standard 288-pin DDR4 DIMM socket; the module has no heat spreader, so low-profile clearance is not an issue.

What is the correct installation sequence for this registered ECC DIMM, and which step is most often missed?

Power down, open the chassis, align the notch with the keyed slot, press firmly until both retention clips click, then enable ECC in the BIOS — the BIOS step is the one most often skipped.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.