Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 192GB 4x48GB DDR5 5600 CL46 ECC RDIMM Supermicro H13SST-G memory upgrade

SKU CH-9VXR-RD673

192GB DDR5 5600 ECC RDIMM kit in four 48GB modules with CL46 timing and 1.1V operation for Supermicro H13SST-G motherboards

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Zobrazit dalších 24 konfigurací
  • 192 GB total capacity from four 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • ECC and registered design corrects errors and stabilises full population
  • 10 V operation matches the motherboard's memory controller spec
  • Verified fit for Supermicro H13SST-G with 288-pin RDIMM form factor

Exact-match upgrade for Supermicro H13SST-G

This 192GB kit delivers four 48GB DDR5 5600 RDIMMs built to the board's required 2Rx8 registered ECC specification. It targets administrators who need the full 192GB capacity recognised at rated speed without manual tuning.

Replaces partial or slower memory populations

The jump is worth it when your server currently runs fewer than four DIMMs, operates at a lower data rate, or uses unbuffered modules that the platform cannot support in a fully populated configuration. Buyers who need more than 192GB total capacity or a different form factor such as UDIMM or SODIMM cannot use this kit.

Installation follows the motherboard manual

Populate the four slots in the order specified by Supermicro for the H13SST-G to ensure the memory controller initialises every rank at 5600 MT/s. The most common issue is ignoring the approved population sequence, which can leave capacity unrecognised or force a fall-back to a lower speed.

Přednosti

  • 192 GB total capacity from four 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • ECC and registered design corrects errors and stabilises full population
  • 10 V operation matches the motherboard's memory controller spec
  • Verified fit for Supermicro H13SST-G with 288-pin RDIMM form factor

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 288-pin RDIMM modules fit the Supermicro H13SST-G motherboard slots?

Yes, the kit uses the 288-pin Registered RDIMM form factor required by the Supermicro H13SST-G; it is not a UDIMM or SODIMM.

What is the correct installation order for the four 48 GB modules on the H13SST-G?

Populate the slots in the sequence specified in the Supermicro H13SST-G manual to ensure all 192 GB are recognised at DDR5-5600.

Does the 1.1 V operating voltage reduce long-term wear on the memory controller?

The modules run at the standard DDR5 1.10 V, matching the controller specification and avoiding over-voltage stress.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.