NEMIX RAM
NEMIX RAM 192GB (6×32GB) DDR5 6400 CL52 2Rx8 ECC Registered RDIMM memory upgrade
Six 32 GB DDR5 registered ECC RDIMMs running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14DST-F motherboard
- Capacity192GB (6 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB total capacity in a matched 6 × 32 GB kit
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors on the fly
- 10 V operation at 2Rx8 rank for full-slot stability
- Verified fit for Supermicro H14DST-F motherboard with 288-pin RDIMM form factor
Exact-fit DDR5-6400 RDIMM kit
This 192 GB kit contains six 32 GB DDR5-6400 registered ECC modules built to the 1.1 V CL52 specification the Supermicro H14DST-F motherboard expects. The 2Rx8 rank layout and 288-pin RDIMM form factor match the board's memory population rules so the full capacity is recognised at rated speed.
Registered architecture and on-die ECC
Registered buffering offloads the memory controller allowing every slot to run fully populated at 6400 MT/s while ECC corrects single-bit errors on the fly. This combination prevents silent data corruption and unplanned reboots in production workloads that demand continuous uptime.
Six-module population requires manual check
Install all six modules following the motherboard manual's approved population order to enable the full 192 GB capacity. Skipping the documented sequence or mixing with existing DIMMs can leave capacity unseen or force the controller to a lower speed. Verify the configuration before purchase.
Přednosti
- 192 GB total capacity in a matched 6 × 32 GB kit
- DDR5 6400 speed with CL52 latency for rated performance
- Registered ECC design corrects single-bit errors on the fly
- 10 V operation at 2Rx8 rank for full-slot stability
- Verified fit for Supermicro H14DST-F motherboard with 288-pin RDIMM form factor
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K6 |
| Capacity | 192GB (6 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 6X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Will the 1.10V DDR5 RDIMMs need any firmware or voltage adjustment later?
The modules run at the standard 1.10V DDR5 voltage; no firmware or voltage adjustment is required after installation.
Does the CL52 latency limit throughput when all six slots are populated on the Supermicro H14DST-F?
CL52 is the rated CAS latency at DDR5 6400; the registered buffer maintains that timing across all six DIMMs without down-clocking.
How much heat do the 192GB of 2Rx8 registered DDR5 produce during continuous operation?
The 1.10V DDR5 RDIMMs operate without heat spreaders; registered buffering reduces controller load, keeping thermals within normal server airflow limits.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



