NEMIX RAM
NEMIX RAM 256GB (2x128GB) DDR5 5600 CL46 ECC RDIMM memory upgrade
A 256GB DDR5 ECC registered server memory kit with two 128GB modules running at 5600 MT/s and CL46 latency
- Capacity256GB (2 x 128GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB total capacity from two 128 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth rating
- ECC registered RDIMM design for data integrity
- 4Rx4 rank configuration optimised for server workloads
- 1 V operating voltage reduces power draw
Server-grade capacity
This 256GB kit delivers 2 x 128GB DDR5 5600 registered ECC RDIMMs built for Supermicro platforms. IT teams select it when workloads demand maximum registered memory density in a two-module configuration.
4Rx4 registered ECC
Each module uses a 4Rx4 organisation with CL46 timing at 1.10V, providing the error-correcting registered signal integrity required by compatible Supermicro B13DET motherboards. This specification determines whether the kit will post and run stably.
Two-slot density
Occupying only two 288-pin DDR5 slots, the kit leaves remaining channels free for future expansion while delivering 256GB total capacity. Builders who need more than two modules per channel or non-registered memory should look elsewhere.
Přednosti
- 256 GB total capacity from two 128 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth rating
- ECC registered RDIMM design for data integrity
- 4Rx4 rank configuration optimised for server workloads
- 1 V operating voltage reduces power draw
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (2X128GB) DDR5 5600MHZ PC5-44800 4Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
Otázky k tomuto produktu
What real-world throughput does the PC5-44800 rating deliver once the modules are installed?
The kit runs at DDR5 5600, giving a peak transfer rate of 44800 MT/s per module when the platform enables that speed.
How does the registered ECC design and CL46 latency affect usable bandwidth on the DDR5 bus?
Registered buffering adds one cycle of address latency while ECC provides single-bit error correction; CL46 sets the minimum read delay at 46 clock cycles.
What physical slot and module dimensions are required to seat the 288-pin RDIMMs in the target chassis?
Each stick uses the standard 288-pin DDR5 RDIMM form factor with no heat spreader, so it fits any server board that accepts full-height registered DIMMs.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



