Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 256GB (4×64GB) DDR5-4800 ECC RDIMM CL40 2Rx4 1.1V Supermicro H14SSF memory upgrade

SKU CH-T8M4-NCGQC

256 GB kit of four 64 GB DDR5-4800 registered ECC RDIMMs at CL40 and 1.1 V, validated for the Supermicro H14SSF motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB capacity from four 64 GB modules for dense server workloads
  • DDR5-4800 speed with CL40 latency matches board-rated performance
  • ECC and registered design corrects errors and stabilises full population
  • 10 V operation meets DDR5 standard for efficient power use
  • 288-pin RDIMM form factor fits Supermicro H14SSF memory slots

Exact-match DDR5-4800 ECC RDIMM kit

This 256GB kit contains four 64GB DDR5-4800 registered ECC RDIMMs built to the Supermicro H14SSF motherboard's exact specifications. The modules run at 1.1V with CL40 latency and a 2Rx4 rank structure so the memory controller recognises the full capacity at rated speed. It is intended for administrators upgrading or populating that specific server platform.

Verify motherboard population rules first

Consult the Supermicro H14SSF manual for supported capacities, approved DIMM slot order and any BIOS requirements before ordering. The board requires 288-pin registered RDIMMs; unbuffered or SODIMM modules will not fit or function. Confirm the maximum memory per channel and total capacity your configuration allows.

Low-voltage registered design runs cool and quiet

Operating at 1.1V, the DDR5 RDIMMs draw minimal power and generate little heat even with all four slots populated. Registered buffering reduces electrical load on the memory controller, aiding stability under sustained workloads. No heat spreaders are fitted, so airflow through the server chassis handles thermal management silently.

Přednosti

  • 256 GB capacity from four 64 GB modules for dense server workloads
  • DDR5-4800 speed with CL40 latency matches board-rated performance
  • ECC and registered design corrects errors and stabilises full population
  • 10 V operation meets DDR5 standard for efficient power use
  • 288-pin RDIMM form factor fits Supermicro H14SSF memory slots

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What comes in the 256GB kit and do I need anything else to install it?

The kit includes four 64GB DDR5-4800 ECC Registered RDIMMs. No extra parts are required; the modules plug directly into the Supermicro H14SSF motherboard's 288-pin slots.

Should I choose this 256GB (4×64GB) kit or a different capacity for my H14SSF?

This 256GB kit uses 2Rx4 modules at 1.1V CL40, matching the board's qualified memory list. Choose it when your workload needs the full 256GB; select a smaller kit only if your configuration requires fewer populated slots.

What does the DDR5-4800 (PC5-38400) rating mean once the modules are running in the server?

The memory controller will operate the kit at 4800 MT/s with CL40 latency and 1.1V, delivering 38400 MB/s peak bandwidth per module while ECC and registered buffering maintain data integrity under full load.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.