SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00500875BTC
Skladem
NEMIX RAM
NEMIX RAM 256GB (4×64GB) DDR5 6400MHz CL52 ECC RDIMM memory upgrade
Four 64 GB DDR5 ECC registered DIMMs totalling 256 GB at 6400 MHz CL52 for Supermicro servers
- Capacity256GB (4 x 64GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 256 GB total capacity across four 64 GB modules
- DDR5 6400 MHz speed with CL52 latency for responsive throughput
- ECC registered design detects and corrects data errors in flight
- 1 V operation reduces power draw under heavy server loads
- Validated for Supermicro X14SBM-TP4F platform compatibility
System-Specific DDR5 ECC RDIMM Kit
This 256GB kit contains four 64GB registered DIMMs built for Supermicro X14SBM-TP4F platforms. It targets server and workstation administrators who need validated ECC memory for mission-critical workloads. The modules operate at 1.1V and carry a CL52 latency rating. Each stick uses a 4Rx4 organisation with major OEM DRAM chips.
Thermals and Power Profile
Registered buffering and 1.1V operation keep per-module power draw low in typical server deployments. No heat spreaders are fitted, so airflow across the 288-pin DDR5 RDIMM form factor handles cooling. The kit runs at the rated 6400MHz speed without additional voltage. Acoustic impact is negligible in standard chassis with managed airflow.
Capacity and Rank Configuration
Total capacity is 256GB delivered as a matched 4×64GB set. Each module implements a 4Rx4 rank structure required by the target platform. Buyers needing different densities, unbuffered DIMMs, or non-ECC memory should look elsewhere. The PC5-51200 designation confirms the 6400MHz data rate for compatible Supermicro systems.
Přednosti
- 256 GB total capacity across four 64 GB modules
- DDR5 6400 MHz speed with CL52 latency for responsive throughput
- ECC registered design detects and corrects data errors in flight
- 1 V operation reduces power draw under heavy server loads
- Validated for Supermicro X14SBM-TP4F platform compatibility
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | Supermicro Compatible Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server RAM |
| Part Number | MR51200-944K4 |
| Capacity | 256GB (4 x 64GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB (4 x 64GB) DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
How do I install the 288-pin DDR5 RDIMM modules in the Supermicro X14SBM-TP4F, and which step is commonly missed?
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both side clips lock, then verify in BIOS that all four 64 GB modules are detected at 6400 MHz; the step often missed is seating the module evenly so both clips engage simultaneously.
What maintenance or replacement will the 4Rx4 ECC RDIMM kit need over its service life?
No scheduled maintenance is required; the modules have no heat spreaders or moving parts, and ECC corrects single-bit errors transparently — only a failed module would need replacement, which is covered by the manufacturer's lifetime replacement warranty.
What limit appears first when the 256 GB kit runs sustained workloads at 1.1 V?
The DDR5 6400 MHz CL52 timing and 1.10 V operating voltage set the thermal and signal-integrity ceiling; under continuous load the memory controller will throttle frequency before voltage or capacity limits are reached.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
