Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green 288-pin DDR5 RDIMM modules in a clear tray

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 5600 ECC RDIMM 4Rx4 CL46 1.1V Dell PowerEdge XE9780L/XE9785L memory upgrade

SKU CH-AKA3-V0TW0

A 256 GB DDR5 ECC registered server memory kit with four 64 GB modules running at 5600 MHz, CL46 latency, 1.1 V, designed for Dell PowerEdge XE9780L and XE9785L rack servers

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity across four 64 GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • ECC registered design protects data integrity in critical applications
  • 1 V operation reduces power draw per module
  • Validated for Dell PowerEdge XE9780L and XE9785L rack servers

System-specific DDR5 kit

This NEMIX RAM kit supplies 256GB across four 64GB registered DIMMs built for Dell PowerEdge XE9780L and XE9785L rack servers. It targets administrators who need maximum capacity in qualified slots without mixing module densities.

DDR5 5600 registered ECC limits

The modules run at DDR5 5600 with a CAS latency of CL46 and require a platform that supports registered ECC RDIMMs at 1.1V. Systems limited to lower speeds, unbuffered DIMMs or non-ECC memory cannot use this kit.

4Rx4 quad-rank density

Each DIMM uses a 4Rx4 organisation, so the memory controller must accept quad-rank registered modules to address the full 64GB per slot. Platforms restricted to dual-rank or single-rank DIMMs will not recognise the full capacity.

Přednosti

  • 256 GB total capacity across four 64 GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • ECC registered design protects data integrity in critical applications
  • 1 V operation reduces power draw per module
  • Validated for Dell PowerEdge XE9780L and XE9785L rack servers

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-944K4
Capacity256GB (4 x 64GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB (4 x 64GB) DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Otázky k tomuto produktu

Should I pick the 256GB kit or a smaller capacity for my Dell PowerEdge XE9780L?

The 256GB kit provides four 64GB modules for maximum supported density in the Dell PowerEdge XE9780L and XE9785L.

What does the 5600 speed rating deliver in my server?

DDR5 5600 (PC5-44800) runs at 5600 MT/s, giving the peak bandwidth the platform specifies for these Dell PowerEdge rack servers.

How does the 288-pin ECC RDIMM interface limit performance?

The 288-pin registered ECC DDR5 interface caps operation at 1.1V with CL46 latency and 4Rx4 organisation for stability in the Dell PowerEdge XE9780L and XE9785L.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.