Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 RDIMM sticks in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 256GB 8x32GB DDR5 5600 PC5-44800 CL46 2Rx8 1.1V ECC RDIMM memory upgrade for Supermicro X14SRA-F

SKU CH-0RM0-VSV25

256 GB DDR5-5600 ECC registered kit in eight 32 GB RDIMMs, CL46 at 1.1 V, built for the Supermicro X14SRA-F motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Zobrazit dalších 4 konfigurací
  • 256 GB total capacity from eight 32 GB modules maximises server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors automatically
  • 1 V operating voltage matches platform spec for stable full-population operation
  • Verified fit for Supermicro X14SRA-F with 288-pin RDIMM form factor and 2Rx8 ranking

Exact-match 256 GB DDR5-5600 kit

This 256 GB kit contains eight 32 GB DDR5-5600 PC5-44800 registered ECC RDIMMs built for the Supermicro X14SRA-F motherboard. Each module runs at 1.1 V with CL46 latency and a 2Rx8 organisation so the memory controller recognises the full capacity at rated speed without manual tuning.

Registered architecture limits and slot count

Registered buffering lets the board run all slots fully populated at the rated 5600 MT/s, while ECC corrects single-bit errors before they reach production workloads. The 288-pin RDIMM form factor is required; UDIMM or SODIMM modules will not fit or function in this platform.

Upgrade from smaller or slower DDR5 configurations

Replacing a partial or lower-capacity DDR5 kit with this eight-module set removes the need to mix ranks or voltages, delivering the full 256 GB the board supports. The jump is worth it when workloads demand maximum registered ECC capacity at the native 5600 MT/s speed.

Přednosti

  • 256 GB total capacity from eight 32 GB modules maximises server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors automatically
  • 1 V operating voltage matches platform spec for stable full-population operation
  • Verified fit for Supermicro X14SRA-F with 288-pin RDIMM form factor and 2Rx8 ranking

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the 256GB 8x32GB kit or a smaller capacity for my Supermicro X14SRA-F?

The 256GB kit provides eight 32GB modules to fill every slot on the X14SRA-F, giving the maximum registered ECC capacity the board supports at DDR5-5600.

What does the DDR5-5600 PC5-44800 rating deliver in a live server?

The modules run at 5600 MT/s with CL46 latency at 1.1V, so the memory controller sees the full 44800 MB/s peak bandwidth per DIMM when all eight slots are populated.

How does the 288-pin RDIMM interface and registered ECC design affect stability?

The registered buffer reduces electrical load on the memory controller, allowing all eight slots to operate at the rated 5600 speed, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.