Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR5 RDIMM modules with gold contacts and black chips no heat spreaders

NEMIX RAM

NEMIX RAM 256GB DDR5 5600MHz CL46 4Rx4 ECC RDIMM 2x128GB memory upgrade

SKU CH-7F24-66Q7P

256 GB DDR5 server memory kit with two 128 GB registered ECC modules running at 5600 MHz CL46 1.1 V for Supermicro X14SDV-42C-SP3F motherboards

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

  • 256GB total capacity from two 128GB modules for maximum server density
  • DDR5-5600 speed with CL46 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 1V operation matches the memory controller specification for stable full-population performance
  • 288-pin RDIMM form factor verified for Supermicro X14SDV-42C-SP3F motherboard compatibility

Exact-fit server upgrade

This NEMIX RAM kit delivers 256GB of DDR5 memory as two 128GB registered ECC RDIMMs. It is built for administrators expanding a Supermicro X14SDV-42C-SP3F motherboard that requires 288-pin DDR5-5600 modules with 4Rx4 organisation and 1.10V operation. The exact rank, voltage and timing match the board's memory controller expectations for full-capacity recognition at rated speed.

Suited for validated platforms.

The kit suits operators who have confirmed their motherboard supports 256GB in this population order and need registered ECC stability for production workloads. Builders using consumer boards, unregistered DIMM slots, or systems that cannot accept 4Rx4 registered modules should look at something else because the registered interface and rank structure will not function there.

Registered ECC with 4Rx4 rank structure

Registered buffering offloads the memory controller so every slot runs fully populated at full capacity, while ECC corrects single-bit errors on the fly. The 4Rx4 organisation and CL46 timing at DDR5-5600 are the decisive specifications that determine whether this kit matches your motherboard's qualified-vendor list.

Přednosti

  • 256GB total capacity from two 128GB modules for maximum server density
  • DDR5-5600 speed with CL46 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 1V operation matches the memory controller specification for stable full-population performance
  • 288-pin RDIMM form factor verified for Supermicro X14SDV-42C-SP3F motherboard compatibility

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the 288-pin RDIMM modules in my Supermicro X14SDV-42C-SP3F and which slot order should I follow?

Power down and unplug the server. Open the chassis and locate the DDR5 DIMM slots. Align each 288-pin RDIMM with the slot key, press straight down until both side clips click, and follow the motherboard manual's population sequence for 4Rx4 registered modules.

What maintenance or replacement will the 1.1 V DDR5 ECC RDIMM kit need over its service life?

No routine maintenance is required. The modules have no heat spreaders, so keep server airflow paths clean. ECC corrects single-bit errors on the fly; if uncorrectable errors appear in system logs, replace the affected 128 GB module.

What limit appears first when the 256 GB kit runs sustained workloads at 5600 MHz CL46?

The memory controller's maximum supported capacity and rank-per-channel limit for 4Rx4 registered DIMMs is reached before thermal throttling, capping usable bandwidth at the rated DDR5-5600 speed.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.