Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green circuit boards with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 ECC UDIMM Kit SuperMicro B3ST1-CPU-001

SKU CH-MPM7-4NVE5

A 32GB dual-channel DDR4 ECC UDIMM kit running at 3200 MT/s with CL22 latency for SuperMicro systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit expands server capacity
  • DDR4 3200 speed handles demanding workloads
  • ECC protection guards data integrity
  • 2 V operation reduces power draw
  • Validated for SuperMicro B3ST1-CPU-001 systems

Server-grade ECC memory kit

This NEMIX RAM kit provides 32 GB of DDR4 3200 ECC UDIMM memory across two 16 GB modules. It is built for SuperMicro B3ST1-CPU-001 systems that require error-correcting unbuffered DIMMs. The modules run at 1.20 V with CL22 timing and use 2Rx8 organisation. They are suited for administrators upgrading compatible SuperMicro servers or workstations.

Not for non-ECC or registered slots

Buyers whose motherboards only accept non-ECC unbuffered memory cannot use this kit because the modules implement ECC. Systems that require registered or load-reduced DIMMs are also incompatible with these unbuffered sticks. Anyone needing capacities beyond 32 GB or speeds above DDR4 3200 should look at other configurations.

Straightforward DIMM installation

Installation consists of aligning each 288-pin module with the slot key and pressing until the retention clips engage. The kit ships without heat spreaders, so clearance around tall CPU coolers is rarely an issue. The most common mistake is mixing these ECC UDIMMs with non-ECC or registered modules, which prevents the system from posting. Always populate slots per the motherboard manual for the correct channel configuration.

Přednosti

  • 32 GB kit expands server capacity
  • DDR4 3200 speed handles demanding workloads
  • ECC protection guards data integrity
  • 2 V operation reduces power draw
  • Validated for SuperMicro B3ST1-CPU-001 systems

Specifikace

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Otázky k tomuto produktu

What motherboard must I already own for this 288-pin DDR4 3200 CL22 ECC UDIMM kit to work?

The kit is validated for the SuperMicro B3ST1-CPU-001 motherboard; the board must provide 288-pin DDR4 slots that accept unbuffered ECC modules at 1.20 V.

How will the 2Rx8 ECC modules behave if I keep my existing DDR4 non-ECC sticks?

Mixing ECC and non-ECC DIMMs on the same board typically disables ECC and forces both sets to run at the lowest common speed and voltage.

How can I confirm the 32 GB kit is running at DDR4 3200 CL22 after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should report 3200 MT/s, CL22 timings, 1.20 V and ECC active.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.