Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR5 SODIMM modules, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V 262-pin SODIMM memory upgrade for Supermicro X13SRN-E

SKU CH-F997-04BF9

A 32 GB kit of two 16 GB DDR5 4800 CL40 SODIMMs built with major OEM chips for the Supermicro X13SRN-E motherboard

  • Capacity32GB (2 x 16GB)
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB capacity with two 16 GB modules for expanded multitasking
  • DDR5 4800 speed rated at PC5-38400 for fast data throughput
  • CL40 latency at 1.1 V for efficient low-power operation
  • 262-pin SODIMM form factor fits Supermicro X13SRN-E memory slots
  • Built with Samsung, Micron or Hynix chips and tested for stability

Exact-match DDR5 upgrade for Supermicro X13SRN-E

This 32 GB kit contains two 16 GB SODIMM modules rated at DDR5 4800 with CL40 timing and 1.10 V operation. The 262-pin unbuffered non-ECC design matches the memory controller specifications for the Supermicro X13SRN-E motherboard.

Suits owners of the X13SRN-E needing maximum

Builders using a different motherboard or requiring ECC registered memory should look elsewhere because this kit is non-ECC unbuffered and validated only for the named Supermicro platform.

Fits directly into the two SODIMM slots

No heat spreader means clearance is minimal and installation follows the board's documented population order. The dual-rank 1Rx8 organisation allows the controller to initialise at full rated speed without manual tuning.

Přednosti

  • 32 GB capacity with two 16 GB modules for expanded multitasking
  • DDR5 4800 speed rated at PC5-38400 for fast data throughput
  • CL40 latency at 1.1 V for efficient low-power operation
  • 262-pin SODIMM form factor fits Supermicro X13SRN-E memory slots
  • Built with Samsung, Micron or Hynix chips and tested for stability

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS38400-618K2
Capacity32GB (2 x 16GB)
Type262-Pin DDR5 SODIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does my Supermicro X13SRN-E need to support DDR5 4800 SODIMM at 1.1V for this kit to work?

Yes — the board must accept DDR5 4800 (PC5-38400) 262-pin SODIMMs at 1.10V, CL40, 1Rx8 Non-ECC Unbuffered; check the manual for supported capacities and slot order.

Will this 32GB kit run alongside any existing DDR5 4800 SODIMM I leave installed?

It will if the other modules are also DDR5 4800 CL40 1.10V 1Rx8 Non-ECC Unbuffered SODIMMs; mixed ranks or timings can force the system to down-clock or fail POST.

How do I confirm the kit is running at DDR5 4800 CL40 after install?

Open BIOS or a tool like CPU-Z and verify the memory reads DDR5 4800 (PC5-38400), CAS 40, 1.10V, 1Rx8, Non-ECC Unbuffered on both slots.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.