BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278038BTC
Skladem
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V UDIMM HP Z2 G9 Tower Workstation memory upgrade
32 GB dual-channel DDR5 kit with two 16 GB UDIMMs at 4800 MT/s, CL40 and 1.1 V for the HP Z2 G9 Tower Workstation
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit expands workstation capacity for heavy workloads
- DDR5 4800 speed accelerates data throughput in HP Z2 G9 Tower
- CL40 latency and 1.1 V operation balance responsiveness with efficiency
- 288-pin UDIMM form factor fits directly into compatible desktop slots
- Major OEM chips from Samsung, Micron or Hynix deliver validated reliability
HP Z2 G9 Tower Workstation memory upgrade
This 32 GB kit provides two 16 GB DDR5 4800 UDIMM modules built for the HP Z2 G9 Tower Workstation. The non-ECC unbuffered design matches the workstation's memory architecture for direct compatibility. IT professionals and workstation owners can install the pair to reach the full 32 GB capacity in minutes.
288-pin DDR5 UDIMM form factor
Each module uses the standard 288-pin DDR5 UDIMM layout so it seats in the workstation's DIMM slots without adapters. The 1.1 V operating voltage aligns with the platform's memory controller for stable operation. Absence of a heat spreader keeps the module height low, avoiding clearance issues with large CPU coolers or chassis baffles.
Lifetime replacement warranty included
NEMIX RAM backs the kit with a lifetime replacement warranty and US-based technical support staffed by IT professionals. Every module undergoes stress testing under load before shipping to verify reliability. The package contains only the two memory modules; no additional cables, software or documentation are bundled.
Přednosti
- 32 GB kit expands workstation capacity for heavy workloads
- DDR5 4800 speed accelerates data throughput in HP Z2 G9 Tower
- CL40 latency and 1.1 V operation balance responsiveness with efficiency
- 288-pin UDIMM form factor fits directly into compatible desktop slots
- Major OEM chips from Samsung, Micron or Hynix deliver validated reliability
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | HPE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Otázky k tomuto produktu
What speed does the DDR5 4800 CL40 kit run at and what PC5 rating does it carry?
The kit runs at 4800 MT/s and is rated PC5-38400, matching the DDR5 4800 standard used by the HP Z2 G9 Tower Workstation.
What physical slot and pin count does this 288-pin UDIMM need on the motherboard?
It needs a standard 288-pin DDR5 UDIMM slot; the HP Z2 G9 Tower Workstation provides four such slots for this 2 x 16 GB kit.
How do I install the two modules and which slot order avoids the common mistake?
Power off, open the chassis, align each module's key notch with the slot, press firmly until the latches click; populate the two slots specified in the HP Z2 G9 manual first, usually the same-coloured pair, to enable dual-channel operation.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
