Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 ECC RDIMM Cisco UCS X410c M7

SKU CH-R3G2-PNA8R

A 32 GB dual-channel DDR5 4800 CL40 ECC registered kit built for the Cisco UCS X410c M7 compute node

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB total capacity for Cisco UCS X410c M7 workloads
  • DDR5 4800 MT/s speed with CL40 latency for server responsiveness
  • ECC registered RDIMM design protects data integrity under load
  • 1 V operation reduces power draw in dense compute nodes
  • 288-pin 1Rx8 modules built with major OEM DRAM chips

Cisco UCS X410c M7 memory kit

This 32 GB kit contains two 16 GB DDR5 4800 registered DIMMs built for the Cisco UCS X410c M7 compute node. It targets administrators who need ECC protection and registered signalling for mission-critical workloads.

Registered ECC modules at 1.1 V

Each 288-pin RDIMM runs at 1.10 V with CL40 latency and a 1Rx8 organisation. The registered buffer and error-correcting code reduce electrical load on the memory controller while detecting and correcting single-bit errors during operation.

Upgrade from lower-capacity or non-ECC DIMMs

The jump is worth it when the node runs virtualisation, databases or analytics that exceed current memory headroom or lack error correction. Builders who need more than two DIMMs per channel or a different form factor cannot use this kit.

Přednosti

  • 32 GB total capacity for Cisco UCS X410c M7 workloads
  • DDR5 4800 MT/s speed with CL40 latency for server responsiveness
  • ECC registered RDIMM design protects data integrity under load
  • 1 V operation reduces power draw in dense compute nodes
  • 288-pin 1Rx8 modules built with major OEM DRAM chips

Specifikace

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Otázky k tomuto produktu

What bandwidth does the DDR5 4800 interface deliver in practice?

The DDR5 4800 (PC5-38400) interface provides up to 38400 MB/s of peak bandwidth per module.

What physical slot and clearance does this 288-pin RDIMM require?

It fits a standard 288-pin DDR5 RDIMM slot and has no heat spreader, so it clears most CPU coolers.

How is the kit installed in the Cisco UCS X410c M7, and what step is often missed?

Power down the node, open the chassis, align the notch on each 1Rx8 module with the keyed slot, press firmly until the ejectors click, then verify both 16 GB modules are recognised in the BIOS memory configuration.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.