BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00279164BTC
Skladem
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V UDIMM ASRock Rack W680D4ID-2T/G5/X550
32 GB dual-channel DDR5 kit with two 16 GB modules at 5600 MHz, CL46, 1.1 V, 288-pin UDIMM for ASRock Rack W680D4ID-2T/G5/X550
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB total capacity from two 16 GB modules
- DDR5 5600 speed for responsive system performance
- Low 1.10 V operation reduces power draw
- CL46 latency supports stable data access
- Validated for ASRock Rack W680D4ID-2T/G5/X550 motherboard
Compatible memory for ASRock Rack
This 32GB kit contains two 16GB DDR5 UDIMM modules validated for the ASRock Rack W680D4ID-2T/G5/X550 motherboard. The non-ECC unbuffered design suits desktop workstations that do not require error correction. Installation follows standard 288-pin DDR5 procedures for quick system upgrades.
Sustained operation at DDR5 5600 CL46 1.1V
Running at 5600 MT/s with CL46 latency and 1.1V, the modules maintain stable throughput during extended workloads. The 1Rx8 organisation and major OEM chips from Samsung, Micron or Hynix provide consistent signal integrity without a heat spreader. The PC5-44800 rating reflects the continuous data rate under load.
DDR5 5600 UDIMM specification
The decisive specification is the DDR5 5600 UDIMM standard with CL46 timing at 1.1V. Systems requiring a different DDR generation, registered DIMMs, ECC support or alternative voltages will not accept this kit. Verify the motherboard documentation matches this exact memory profile before purchase.
Přednosti
- 32 GB total capacity from two 16 GB modules
- DDR5 5600 speed for responsive system performance
- Low 1.10 V operation reduces power draw
- CL46 latency supports stable data access
- Validated for ASRock Rack W680D4ID-2T/G5/X550 motherboard
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Otázky k tomuto produktu
How much power does the 5600 CL46 kit draw at 1.1 V when the system runs all day?
The modules operate at 1.10 V, the standard DDR5 voltage, so power draw stays low during continuous operation.
What motherboard slot and memory type must I already have for this 288-pin DDR5 kit to work?
You need a board with DDR5 UDIMM slots — this kit is validated for the ASRock Rack W680D4ID-2T/G5/X550.
Will the 1Rx8 rank layout and CL46 timing work with older DDR5 DIMMs I might keep in the other slots?
The kit uses a 1Rx8 organisation at CL46; mixing ranks or timings can force the board to run at the slowest common settings.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
