NEMIX RAM
NEMIX RAM 32GB (4 x 8GB) DDR5 5600 PC5-44800 1Rx8 1.1V Non-ECC UDIMM server RAM
A 32 GB DDR5 kit of four 8 GB UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation
- Capacity32GB (4 x 8GB)
- SpeedDDR5 5600 (PC5 44800)
- CAS Latency46
- Voltage1.1V
- ECCNo
- Buffered/RegisteredUnbuffered
- 32 GB total capacity in a 4 x 8 GB kit
- DDR5 5600 MT/s speed rated at PC5-44800
- Low 1.1 V operating voltage for efficiency
- Non-ECC unbuffered UDIMM with 1Rx8 organisation
- CAS latency 46 for responsive performance
Capacity and configuration
This kit provides 32 GB of DDR5 memory across four 8 GB unbuffered UDIMM modules. It is built for desktop systems and entry-level servers that accept 288-pin DDR5 DIMMs and do not require ECC or registered memory.
Speed and timing
The modules run at 5600 MT/s with a PC5-44800 rating and CAS latency of 46 at 1.1 V. This JEDEC-standard profile delivers stable operation without manual overclocking or XMP configuration.
Rank density and headroom
Each stick uses a single-rank 1Rx8 organisation, which helps memory controllers maintain signal integrity when all four slots are populated. The kit fills a typical four-slot consumer board completely, so further expansion would require replacing modules rather than adding more.
Přednosti
- 32 GB total capacity in a 4 x 8 GB kit
- DDR5 5600 MT/s speed rated at PC5-44800
- Low 1.1 V operating voltage for efficiency
- Non-ECC unbuffered UDIMM with 1Rx8 organisation
- CAS latency 46 for responsive performance
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MD44800-818K4-SM-AS-1015A-MT-01-G2 |
| Part Number | Part#: MD44800-818K4-SM-AS-1015A-MT-01-G2 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Otázky k tomuto produktu
Will the 1Rx8 DDR5 modules need replacement if I later upgrade to registered memory?
These are unbuffered non-ECC UDIMMs; they cannot be mixed with registered or ECC modules, so a platform change to registered memory would require replacing all four sticks.
What limit appears first when the kit runs at 5600 MT/s continuously?
The CAS latency of 46 cycles at 1.1 V is the primary timing constraint; sustained workloads will hit this latency ceiling before voltage or thermal limits become significant.
How much heat and power should I expect from four sticks at 5600 all day?
Each module operates at 1.1 V DDR5 standard voltage; total power draw stays within typical UDIMM limits and passive cooling in a server chassis is sufficient for continuous operation.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



