Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz ECC RDIMM CL21 1.2V 2Rx4 288-Pin HPE P19043-B21 memory upgrade

SKU CH-6FJP-7950Z

Adds 32 GB of DDR4 ECC registered server memory at 2933 MHz CL21 1.2 V for HPE systems

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB capacity supports demanding server workloads
  • DDR4 2933MHz speed enables fast data throughput
  • ECC registered design detects and corrects memory errors
  • 2V operation reduces power consumption in dense configurations
  • 288-pin RDIMM form factor fits HPE P19043-B21 compatible systems

HPE-Compatible 32GB DDR4 RDIMM

This 32GB DDR4 2933MHz ECC registered DIMM is built for HPE servers and workstations that require registered memory with error correction. It suits IT professionals upgrading or repairing supported enterprise platforms.

Tool-free DIMM installation in minutes

The module seats in a standard 288-pin DDR4 RDIMM slot without extra tools or cables. Common issues arise when mixing registered and unbuffered DIMMs or populating slots in an order the system firmware does not accept.

Verify registered ECC support

Before ordering, confirm the target system accepts DDR4 2933MHz registered ECC RDIMMs and check the service manual for approved slot configurations and maximum per-channel capacity.

Přednosti

  • 32GB capacity supports demanding server workloads
  • DDR4 2933MHz speed enables fast data throughput
  • ECC registered design detects and corrects memory errors
  • 2V operation reduces power consumption in dense configurations
  • 288-pin RDIMM form factor fits HPE P19043-B21 compatible systems

Specifikace

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-324K1
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

How can I confirm the 32GB DDR4 2933MHz ECC RDIMM is running at CL21 1.2V after installation?

Enter the server BIOS or UEFI and verify the memory speed shows 2933 MT/s, CAS latency reads 21, voltage reports 1.2V and ECC status is enabled for the installed module.

What ships with the 32GB 2Rx4 288-pin RDIMM and what must I source separately?

The box contains one 32GB DDR4 2933MHz CL21 1.2V ECC registered DIMM; no cables, brackets or additional DIMMs are included, so any extra modules or tools are purchased separately.

Which NEMIX RAM DDR4 2933MHz ECC RDIMM variant matches the HPE P19043-B21 part number?

Choose the 32GB 2Rx4 CL21 1.2V 288-pin registered module carrying NEMIX part MR23400-324K1, as it is the specific configuration validated for the HPE P19043-B21 server memory slot.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.