Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR5 RDIMM modules in a row, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 384GB (4×96GB) DDR5 4800 CL40 2Rx4 ECC Registered RDIMM Supermicro H13SVW-N memory upgrade

SKU CH-R9FA-CK6GP

384 GB DDR5-4800 registered ECC kit (4 × 96 GB, CL40, 1.1 V, 288-pin) validated for Supermicro H13SVW-N servers

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Zobrazit dalších 12 konfigurací

Speed 4800MHz

  • 384 GB total capacity lets your server handle massive workloads with four 96 GB modules
  • DDR5 4800 speed transfers data at PC5-38400 bandwidth for high-throughput applications
  • CL40 latency at 1.1 V balances quick response with efficient power draw
  • Registered 2Rx4 ECC architecture corrects single-bit errors and buffers signals for stable full-population operation
  • 288-pin RDIMM form factor matches the Supermicro H13SVW-N motherboard slot and population rules

384 GB DDR5 ECC RDIMM kit for Supermicro H13SVW-N

This 384 GB kit contains four 96 GB DDR5 4800 RDIMMs built to the exact rank, voltage and timing the Supermicro H13SVW-N memory controller expects. Registered ECC architecture and 1.1 V operation let every slot run fully populated at rated speed while correcting single-bit errors on the fly.

Suited for max-capacity server builds.

The 2Rx4 Registered RDIMM form factor matches the H13SVW-N population rules, so integrators populating all channels get full 384 GB recognition without down-clocking. Builders whose motherboards require unbuffered UDIMMs or SODIMMs cannot use this kit and should look for the correct module type instead.

288-pin DDR5 4800 CL40 Registered ECC specification

Each module runs at DDR5 4800 (PC5-38400) with CL40 latency at 1.10 V in a 288-pin RDIMM package. That precise speed, voltage and registered ECC combination is the single spec that decides whether the kit will be recognised at full capacity and run stably in the target Supermicro platform.

Přednosti

  • 384 GB total capacity lets your server handle massive workloads with four 96 GB modules
  • DDR5 4800 speed transfers data at PC5-38400 bandwidth for high-throughput applications
  • CL40 latency at 1.1 V balances quick response with efficient power draw
  • Registered 2Rx4 ECC architecture corrects single-bit errors and buffers signals for stable full-population operation
  • 288-pin RDIMM form factor matches the Supermicro H13SVW-N motherboard slot and population rules

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Must my Supermicro H13SVW-N motherboard already run DDR5 RDIMM memory for this 288-pin kit to work?

Yes. The H13SVW-N is a DDR5 platform that requires 288-pin Registered DIMMs. This kit matches the board's native memory type, so it installs directly without any adapter or converter.

Can I keep my existing DDR5 4800 CL40 RDIMMs installed alongside these four 96 GB modules?

You can mix same-speed DDR5 RDIMMs if the motherboard's population rules allow it. The H13SVW-N manual defines which slots must be filled first and whether ranks or voltages must match across channels.

How do I confirm the kit is running at DDR5 4800 CL40 1.10 V with ECC active after installation?

Enter the BIOS and check the memory information screen: it should show 384 GB total, 4800 MT/s, CL40 timings, 1.10 V, and ECC enabled. The OS can also report corrected error counters to prove ECC is working.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.