NEMIX RAM
NEMIX RAM 384GB 8x48GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14DST-FL memory upgrade
Eight 48 GB DDR5 6400 CL52 1.1 V ECC registered RDIMMs totalling 384 GB, validated for the Supermicro H14DST-FL motherboard
- Capacity384GB (8 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity across eight 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput on supported platforms
- 10 V registered ECC RDIMM design offloads the memory controller for full-slot stability
- 2Rx8 288-pin form factor matches the Supermicro H14DST-FL motherboard requirements exactly
- Major OEM Samsung, Micron or Hynix chips provide enterprise-grade component consistency
Exact-Match Upgrade for Supermicro H14DST-FL
This 384GB kit delivers eight 48GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.1V operation. Registered ECC architecture ensures the modules are recognised at full capacity and run at rated speed on the target motherboard. It is built for administrators who need a validated, high-density memory upgrade for that specific platform.
Thermals Noise and Power Draw
Registered buffering reduces electrical load on the memory controller, allowing all eight slots to run fully populated at the rated 1.1V without extra voltage headroom. The modules ship without heat spreaders, relying on standard server airflow for cooling. Power consumption scales with the 384GB capacity at the specified voltage and frequency.
Build Quality and Daily Implications
Each DIMM uses major OEM chips from Samsung Micron or Hynix in a 2Rx8 288-pin RDIMM form factor that matches the board's population rules. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The kit is an exact-fit part so installation follows the motherboard manual's approved slot order with no adapter or cable routing concerns.
Přednosti
- 384 GB total capacity across eight 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput on supported platforms
- 10 V registered ECC RDIMM design offloads the memory controller for full-slot stability
- 2Rx8 288-pin form factor matches the Supermicro H14DST-FL motherboard requirements exactly
- Major OEM Samsung, Micron or Hynix chips provide enterprise-grade component consistency
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K8 |
| Capacity | 384GB (8 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 8X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
How do I install this 8-module DDR5 6400 RDIMM kit in the Supermicro H14DST-FL, and which slot order do people often get wrong?
Populate all eight 288-pin slots following the motherboard manual's exact population sequence; skipping the prescribed order prevents the 384 GB kit from being recognised at full speed.
What maintenance or replacement will this registered ECC DDR5 memory need over its service life?
No routine maintenance is required; if a module fails the lifetime replacement warranty covers a direct swap of the defective 48 GB RDIMM.
What limit appears first when this 1.1 V CL52 kit runs sustained workloads on the H14DST-FL?
The memory controller's maximum supported capacity and ranked-population rules cap usable density before thermal or voltage headroom becomes a factor.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



