NEMIX RAM
NEMIX RAM 48GB DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM Supermicro H14SST-G memory upgrade
48GB DDR5 5600 RDIMM with ECC and registered architecture for Supermicro H14SST-G motherboards
- Capacity48GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- Exact-match upgrade for Supermicro H14SST-G
- 48 GB DDR5 5600 CL46 registered ECC module
- 2Rx8 rank and 1.1 V voltage match controller specs
- 288-pin RDIMM form factor fits every slot
- ECC corrects single-bit errors on the fly
Exact-match server upgrade
This 48 GB DDR5-5600 registered ECC module is built to the precise rank, voltage and timing the Supermicro H14SST-G memory controller expects. It installs as a single 288-pin RDIMM so the board recognises the full capacity at rated speed without manual tuning.
Enterprise stability under load
Registered architecture offloads the memory controller, allowing every populated slot to run at 1.1 V and CL46 while ECC corrects single-bit errors on the fly. The design prevents silent data corruption and unplanned reboots during sustained workloads.
Verified fitment constraint
Compatibility is limited to the Supermicro H14SST-G motherboard and its defined population rules; other boards, form factors or unbuffered memory types are not supported. Consult the system manual for approved DIMM order and maximum capacity before purchase.
Přednosti
- Exact-match upgrade for Supermicro H14SST-G
- 48 GB DDR5 5600 CL46 registered ECC module
- 2Rx8 rank and 1.1 V voltage match controller specs
- 288-pin RDIMM form factor fits every slot
- ECC corrects single-bit errors on the fly
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K1 |
| Capacity | 48GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
How do I install this 48GB DDR5 5600 RDIMM in my Supermicro H14SST-G and what step do people often miss?
Power down, open the chassis, and insert the 288-pin module into the slot specified by the motherboard manual for your population order; the step most often missed is checking that manual first to confirm the correct slot sequence for 2Rx8 registered DIMMs.
What maintenance or replacement will this ECC registered memory need over time?
No routine maintenance is required; the module either passes POST and runs error-free or it develops correctable ECC events that warrant a replacement under the lifetime warranty.
What limit appears first when this 1.1V CL46 kit runs sustained workloads on the H14SST-G?
The memory controller's maximum supported speed of 5600 MT/s is the first ceiling; the module is rated for that speed at 1.1V, so sustained use stays within spec without thermal throttling.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



