Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Six green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts along the bottom edge

NEMIX RAM

NEMIX RAM 576GB (6 x 96GB) DDR5 5600 ECC RDIMM memory upgrade for Supermicro H13SSL-NT

SKU CH-SBM9-9ZC0F

Six 96 GB DDR5 5600 Registered ECC modules deliver 576 GB for the Supermicro H13SSL-NT at 1.1 V CL46

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Zobrazit dalších 24 konfigurací
  • 576 GB total capacity from six 96 GB modules for high-density server workloads
  • DDR5 5600 MT/s rated speed delivers rated throughput for memory-intensive tasks
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 10 V operating voltage matches the platform's memory-controller specification
  • 288-pin RDIMM form factor fits the Supermicro H13SSL-NT motherboard exactly

Exact-match DDR5 RDIMM kit for Supermicro H13SSL-NT

This NEMIX RAM kit delivers 576 GB total capacity through six 96 GB DDR5 5600 registered ECC modules. Each 288-pin RDIMM runs at 1.10 V with CL46 latency and a 2Rx4 organisation. The registered design buffers address and control signals so the memory controller can drive a fully populated server board at rated speed.

Built for the Supermicro H13SSL-NT motherboard

This kit suits administrators who need the exact rank, voltage and timing combination that the H13SSL-NT memory controller expects. Builders using consumer UDIMMs, SODIMMs or non-ECC modules should look elsewhere, as those form factors will not fit or function in this server platform. Systems requiring a different capacity per DIMM or a different DDR generation are also not addressed by this product.

Registered ECC with 2Rx4 organisation

The registered (buffered) architecture offloads the memory controller, allowing all six slots to run fully populated at DDR5 5600 while ECC corrects single-bit errors on the fly. This combination of registration, ECC and 2Rx4 rank structure is the single specification that determines whether the modules will be recognised at full capacity and operate stably in the target motherboard.

Přednosti

  • 576 GB total capacity from six 96 GB modules for high-density server workloads
  • DDR5 5600 MT/s rated speed delivers rated throughput for memory-intensive tasks
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 10 V operating voltage matches the platform's memory-controller specification
  • 288-pin RDIMM form factor fits the Supermicro H13SSL-NT motherboard exactly

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much heat and power do the 1.10V 5600 modules add when all six run continuously?

Each 96GB RDIMM operates at 1.10V DDR5 standard voltage; the registered design reduces electrical load on the memory controller, so total power scales with the 576GB capacity but stays within the platform's DDR5 thermal envelope.

What must the Supermicro H13SSL-NT already provide for this 288-pin kit to function?

The board needs six free DDR5 RDIMM slots wired for registered ECC memory, a BIOS that supports 2Rx4 96GB density modules, and a memory controller rated for PC5-44800 speeds.

Can I mix this CL46 2Rx4 kit with other DDR5 RDIMMs already in the system?

Mixing is only reliable when every module matches the 5600 speed, 1.10V voltage, CL46 timing, 2Rx4 rank layout and registered ECC architecture; otherwise the controller will down-clock or disable slots.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.