Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR5 RDIMM sticks without heat spreaders, 288-pin, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 6400 CL52 2Rx4 ECC Registered RDIMM for Supermicro X14SDV-42C-SP3F memory upgrade

SKU CH-4F16-JDW3Q

A 64 GB DDR5-6400 registered ECC kit (2 × 32 GB, CL52, 1.1 V, 2Rx4) built to the exact specifications of the Supermicro X14SDV-42C-SP3F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • 64 GB capacity with two 32 GB modules for full server memory population
  • DDR5 6400 speed with CL52 latency at 1.10 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • 288-pin 2Rx4 form factor matches Supermicro X14SDV-42C-SP3F slot requirements
  • Major OEM Samsung Micron Hynix chips provide enterprise-grade component reliability

64GB DDR5 6400 Registered ECC Kit

This 64GB kit contains two 32GB DDR5 6400 RDIMMs built for the Supermicro X14SDV-42C-SP3F motherboard. Each module runs at CL52 latency and 1.10V as a 2Rx4 Registered ECC device. The 288-pin form factor matches the board's DDR5 slots exactly so the memory controller recognises the full capacity at rated speed. It targets administrators who need validated server memory for this specific platform.

Registered DDR5 Interface Limits

Registered DDR5 architecture buffers address and command signals so the memory controller can drive every populated slot at the rated 6400 MT/s data rate. ECC circuitry corrects single-bit errors on the fly to prevent silent data corruption. The modules require a motherboard wired for 288-pin RDIMMs; they will not fit UDIMM or SODIMM slots and they cannot operate on platforms that only support unbuffered memory.

64GB Capacity and Headroom

The 64GB total delivered by two 32GB ranks provides ample space for typical virtualisation hosts, database buffers and container workloads on this board. Population rules for the X14SDV-42C-SP3F determine how many additional kits can be added before the controller reaches its maximum supported capacity. Workloads that demand more memory than the board's validated limit will require a different platform rather than larger modules of this specification.

Přednosti

  • 64 GB capacity with two 32 GB modules for full server memory population
  • DDR5 6400 speed with CL52 latency at 1.10 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • 288-pin 2Rx4 form factor matches Supermicro X14SDV-42C-SP3F slot requirements
  • Major OEM Samsung Micron Hynix chips provide enterprise-grade component reliability

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I choose the 64GB 2x32GB kit or a different capacity for my Supermicro X14SDV-42C-SP3F?

This 64GB kit provides two 32GB DDR5 6400 RDIMMs. Check your motherboard manual for the supported capacity per slot and the total memory limit before deciding.

What does DDR5 6400 mean for actual throughput in the X14SDV-42C-SP3F?

The modules run at 6400 MT/s, delivering PC5-51200 bandwidth when the memory controller is configured for that speed and all slots are populated with registered DIMMs.

Does the 288-pin RDIMM interface limit how many modules I can install?

The 288-pin registered form factor is required by the X14SDV-42C-SP3F; the board's memory-population rules determine the maximum number of modules and the installation order.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.