Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR5 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1.1V UDIMM memory upgrade

SKU CH-GFEE-2ZJVT

A 64 GB kit of four 16 GB DDR5 UDIMM modules running at 4800 MT/s with CL40 latency and 1.1 V operation

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 4X16GB

  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 latency tuned for responsive system operation
  • 1 V low voltage reduces power draw and heat
  • Validated for Supermicro MBD-C9Z790-CGW workstation motherboards

64GB DDR5 kit for Supermicro workstations

This 64GB kit contains four 16GB DDR5 4800 UDIMM modules built for Supermicro desktop and SuperWorkstation platforms. It targets IT professionals and builders who need validated, non-ECC memory for memory-intensive workloads on supported motherboards such as the MBD-C9Z790-CGW.

Sustained load stability at 1.1V

Modules are stress-tested under load to maintain stability during extended compute sessions. The 1.10V operating voltage and CL40 latency support consistent throughput for rendering, virtualization and data-processing tasks without thermal throttling concerns.

Unbuffered 288-pin layout without spreaders

The 288-pin unbuffered design fits standard DDR5 UDIMM slots and the low-profile modules sit cleanly alongside large CPU coolers. Buyers who require ECC error correction or registered signalling should select a different kit, as this product provides neither.

Přednosti

  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 latency tuned for responsive system operation
  • 1 V low voltage reduces power draw and heat
  • Validated for Supermicro MBD-C9Z790-CGW workstation motherboards

Specifikace

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 1.10 V DDR5 4800 modules stay cool and quiet during all-day workloads?

Running at the standard 1.10 V DDR5 voltage with no heat spreader, these UDIMMs rely on case airflow; power draw is typical for 4800 MT/s CL40 kits, so noise and heat depend on your chassis cooling.

What motherboard slot and CPU memory controller do I need for this 288-pin UDIMM kit to work?

You need a desktop board with four 288-pin DDR5 UDIMM slots and a CPU that supports DDR5 4800 non-ECC unbuffered memory; the kit is validated for Supermicro C9Z790-CGW workstations.

Can I mix this 1Rx8 CL40 kit with other DDR5 sticks I already own?

Mixing ranks, latencies or voltages can prevent the system from training at 4800 MT/s; for guaranteed stability, populate all four slots with this matched 64 GB kit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.