BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.0027834BTC
Skladem
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V UDIMM SuperMicro C9Z790-CG memory upgrade
A 64 GB DDR5 kit of four 16 GB unbuffered UDIMMs at 5600 MT/s, CL46, 1.1 V, validated for the SuperMicro C9Z790-CG motherboard
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit boosts multitasking capacity with four 16 GB modules
- DDR5 5600 speed raises data throughput to PC5-44800 bandwidth
- CL46 latency keeps response tight for demanding workloads
- 10 V operation reduces power draw per module
- Validated for SuperMicro C9Z790-CG motherboard compatibility
DDR5 5600 UDIMM kit for SuperMicro C9Z790-CG
This 64GB kit contains four 16GB DDR5 5600 unbuffered non-ECC modules built for the SuperMicro C9Z790-CG motherboard. Each stick runs at 1.10V with CL46 latency and a 1Rx8 organisation. The set targets workstation and server builders who need validated capacity for that specific platform.
Verify DDR5 UDIMM support
Confirm the motherboard accepts four 288-pin DDR5 UDIMMs at 5600 MT/s and that the BIOS recognises 1Rx8 density without ECC. The kit is not buffered or registered, so it will not work in slots requiring registered DIMMs. Check the manual for maximum per-slot capacity and population rules.
Low-voltage operation keeps thermals modest
At 1.10V the modules draw minimal power and run without heat spreaders, so airflow across the slots is sufficient for normal workloads. Noise is limited to the system fans already present. The low voltage also reduces stress on the memory controller during sustained loads.
Přednosti
- 64 GB kit boosts multitasking capacity with four 16 GB modules
- DDR5 5600 speed raises data throughput to PC5-44800 bandwidth
- CL46 latency keeps response tight for demanding workloads
- 10 V operation reduces power draw per module
- Validated for SuperMicro C9Z790-CG motherboard compatibility
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 5600MHZ Non-ECC Unbuffered RAM |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
Otázky k tomuto produktu
Does the kit include anything other than the four 16 GB modules?
The package contains only the four 16 GB DDR5 5600 UDIMM modules; no cables, brackets or tools are included.
Why choose this 64 GB kit over smaller or faster alternatives?
It provides 64 GB total capacity at DDR5 5600 with CL46 latency and 1.10 V operation, matching the SuperMicro C9Z790-CG qualified specification.
What real-world effect does the CL46 timing have on this DDR5 5600 kit?
CL46 is the CAS latency rating; at 5600 MT/s it determines the minimum cycle delay before data becomes available after a read command.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
