Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-D287-QF9PH

64GB DDR5 4800 CL40 2Rx4 1.1V ECC Registered RDIMM validated for Supermicro H14DST-F motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB

Zobrazit dalších 30 konfigurací
  • 64 GB DDR5 capacity fills a single 288-pin slot with 4800 MT/s bandwidth
  • CL40 latency and 1.1 V operation match the H14DST-F memory controller spec
  • Registered 2Rx4 architecture offloads the controller for full-population stability
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • Samsung, Micron or Hynix major-OEM chips ensure enterprise-grade reliability

Exact-match DDR5-4800 ECC RDIMM for Supermicro

This 64GB DDR5 module runs at 4800MHz with CL40 timing and 1.10V voltage. It uses a 2Rx4 registered design with ECC for error correction. The 288-pin RDIMM form factor matches the Supermicro H14DST-F motherboard requirements exactly.

DDR5-4800 speed ceiling and registered buffer limits

The module operates at the DDR5-4800 standard with PC5-38400 bandwidth. Registered buffering allows full-capacity population across all supported slots by reducing electrical load on the memory controller. ECC corrects single-bit errors automatically. Maximum capacity and population rules are defined by the motherboard manual, not the module itself.

Straightforward 288-pin RDIMM installation

Installation follows standard 288-pin RDIMM alignment in the motherboard slots. The critical step is consulting the Supermicro H14DST-F manual for approved DIMM population order and supported capacity configurations. Incorrect slot placement or exceeding the board's validated capacity per channel will prevent boot or limit recognition. Not for systems requiring UDIMM, SODIMM, or non-ECC unbuffered memory.

Přednosti

  • 64 GB DDR5 capacity fills a single 288-pin slot with 4800 MT/s bandwidth
  • CL40 latency and 1.1 V operation match the H14DST-F memory controller spec
  • Registered 2Rx4 architecture offloads the controller for full-population stability
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • Samsung, Micron or Hynix major-OEM chips ensure enterprise-grade reliability

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the 64GB DDR5 4800 CL40 2Rx4 RDIMM or a different capacity for my Supermicro H14DST-F?

This module is a 64GB DDR5 4800 CL40 2Rx4 registered ECC RDIMM at 1.1V. Match the exact rank, voltage, and timing your server's memory controller expects so it is recognised at full capacity and runs at its rated speed.

What does the 4800 MT/s speed mean once the DIMM is installed in the H14DST-F?

The module runs at DDR5 4800 (PC5 38400) with CL40 latency at 1.1V. Registered architecture offloads the memory controller so every slot runs fully populated at full capacity while ECC corrects single-bit errors on the fly.

Does the 288-pin RDIMM interface limit how many modules I can install on this motherboard?

The H14DST-F requires 288-pin registered RDIMMs, not UDIMMs or SODIMMs. Consult your system or motherboard manual for supported capacities, approved DIMM population order, and installation steps before purchase.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.