Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with gold-edge connector and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro H14SHM memory upgrade

SKU CH-WZNP-C4RSR

64 GB DDR5-5600 ECC registered DIMM, 2Rx4 CL46 1.1 V, validated for Supermicro H14SHM

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

Zobrazit dalších 24 konfigurací
  • Exact-match upgrade for Supermicro H14SHM with 64GB DDR5-5600 CL46 2Rx4 registered ECC
  • Verified fitment: 288-pin RDIMM form factor matches board memory-population rules
  • Enterprise stability from registered architecture and ECC correcting single-bit errors on the fly
  • 1V operation at PC5-44800 speed reduces power draw while maintaining rated performance
  • Lifetime replacement warranty with free US-based technical support included

Exact-match DDR5 upgrade

This 64 GB DDR5-5600 registered ECC RDIMM is built to the Supermicro H14SHM memory controller's exact rank, voltage and timing requirements. It installs as a direct replacement so the server recognises the full capacity and runs at the rated PC5-44800 speed without manual tuning.

Thermals and power

Operating at 1.1 V, the module draws minimal power and generates little heat even when every slot is populated. The registered architecture buffers the control lines, keeping electrical loading low and allowing stable, quiet operation in densely packed server chassis.

Build integration

The 288-pin RDIMM form factor fits only boards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots. ECC corrects single-bit errors on the fly, preventing silent data corruption, while the registered design lets you fill all supported slots at full capacity. Verify your motherboard manual for approved population order before installation.

Přednosti

  • Exact-match upgrade for Supermicro H14SHM with 64GB DDR5-5600 CL46 2Rx4 registered ECC
  • Verified fitment: 288-pin RDIMM form factor matches board memory-population rules
  • Enterprise stability from registered architecture and ECC correcting single-bit errors on the fly
  • 1V operation at PC5-44800 speed reduces power draw while maintaining rated performance
  • Lifetime replacement warranty with free US-based technical support included

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the 288-pin RDIMM into the Supermicro H14SHM and which population rule do people miss?

Power down, open the chassis, and insert the module into the DIMM slot specified first in the motherboard manual — most builds skip that ordered-population step and the system will not POST with the 64 GB stick in the wrong slot.

What maintenance or replacement will this DDR5 ECC RDIMM need over its service life?

No scheduled maintenance is required; the registered ECC design corrects single-bit errors automatically, and the module is covered by a lifetime replacement warranty if a hardware fault ever develops.

What limit appears first when the 5600 MHz CL46 kit runs sustained workloads?

The registered buffer and 1.10 V operation keep every slot stable at the rated 5600 MT/s, so the practical ceiling is the motherboard's maximum supported capacity rather than a thermal or timing bottleneck.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.