NEMIX RAM
NEMIX RAM 768GB 6x128GB DDR5 6400 CL52 ECC RDIMM Supermicro H14SHM
A 768 GB DDR5 ECC registered DIMM kit of six 128 GB modules running at 6400 MT/s with CL52 latency for the Supermicro H14SHM motherboard
- Capacity768GB (6 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 768 GB total capacity from six matched 128 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated bandwidth without down-clocking
- Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
- 1 V operation at 2Rx4 rank matches the Supermicro H14SHM memory controller exactly
- 288-pin RDIMM form factor fits the board's required slot type and population rules
Exact-match DDR5 kit for Supermicro H14SHM
This 768GB kit contains six 128GB DDR5 6400 RDIMMs built to the memory controller's precise rank, voltage and timing requirements. Each module is a 288-pin registered ECC DIMM operating at 1.1V with CL52 latency, so the server recognises the full capacity at rated speed.
Registered ECC limits and population rules
Registered architecture buffers the address and command bus, allowing every slot to run fully populated while ECC corrects single-bit errors on the fly. The motherboard manual defines the supported capacities, approved DIMM population order and any maximum per-channel limits that govern installation.
6x128GB 2Rx4 CL52 at 1.1V
The combination of six dual-rank 2Rx4 modules at CL52 and 1.1V is the single specification that determines whether this kit matches the board's validated configuration. Buyers who need a different capacity per module, rank structure or latency should verify the manual before ordering.
Přednosti
- 768 GB total capacity from six matched 128 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated bandwidth without down-clocking
- Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
- 1 V operation at 2Rx4 rank matches the Supermicro H14SHM memory controller exactly
- 288-pin RDIMM form factor fits the board's required slot type and population rules
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K6 |
| Capacity | 768GB (6 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 6X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Should I choose the 6 x 128 GB kit or a different capacity for my Supermicro H14SHM?
The 768 GB kit provides six 128 GB RDIMMs; populate all six slots to reach the full capacity your board supports.
What does the DDR5 6400 speed mean once the modules are installed in the server?
The memory controller will run the kit at 6400 MT/s with CL52 latency at 1.1 V, delivering the rated bandwidth when all slots are filled.
How does the 288-pin RDIMM interface and registered design affect real-world limits?
Registered buffering lets every slot run fully populated at 6400 MT/s while ECC corrects single-bit errors on the fly.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



