Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 768GB 8x96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM Supermicro X14DBG-LC+ memory upgrade

SKU CH-862K-1PTH7

768GB DDR5-6400 ECC registered kit with eight 96GB modules at CL52 and 1.1V for Supermicro X14DBG-LC+

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Zobrazit dalších 3 konfigurací
  • 768 GB total capacity from eight 96 GB modules for maximum memory density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for Supermicro X14DBG-LC+
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the motherboard's memory-controller voltage requirement exactly
  • 288-pin RDIMM form factor fits the board's DDR5 slots without adapters

768GB DDR5 6400 ECC RDIMM Kit

This 768GB kit contains eight 96GB DDR5 6400 registered ECC RDIMMs built for the Supermicro X14DBG-LC+ motherboard. It targets servers that require maximum registered memory capacity with on-the-fly error correction.

Check Motherboard Manual First

Verify the Supermicro X14DBG-LC+ manual for supported capacities per socket, approved DIMM population order, and any BIOS version requirements before ordering. Registered ECC RDIMMs must match the board's exact rank, voltage, and timing expectations to be recognised at full speed.

Full-Population Registered Design

The 2Rx4 registered architecture offloads the memory controller so all eight slots can run fully populated at the rated 6400 speed. ECC corrects single-bit errors automatically, preventing silent data corruption in production workloads. Modules operate at 1.1V without heat spreaders.

Přednosti

  • 768 GB total capacity from eight 96 GB modules for maximum memory density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for Supermicro X14DBG-LC+
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the motherboard's memory-controller voltage requirement exactly
  • 288-pin RDIMM form factor fits the board's DDR5 slots without adapters

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What is included in the 768GB kit and does anything else need to be purchased?

The kit contains eight 96GB DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM modules for a total of 768GB. No additional memory parts are required to reach this capacity.

How do I choose between the available versions or capacities for this Supermicro X14DBG-LC+ upgrade?

This listing is a single 768GB kit of eight 96GB modules. Select it when your board's memory population rules call for a full eight-DIMM configuration at DDR5 6400 with 2Rx4 registered ECC.

What does the DDR5 6400 CL52 rating mean once the modules are installed in the server?

The memory controller will run the kit at 6400 MT/s with a CAS latency of 52 cycles at 1.1V, delivering the rated bandwidth and error-correcting registered operation the X14DBG-LC+ expects.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.