SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00498233BTC
Skladem
NEMIX RAM
NEMIX RAM 8GB DDR3 1333 204-Pin SODIMM POSIFLEX TK-3231 memory upgrade
An 8 GB DDR3 SODIMM module rated at 1333 MHz for upgrading POSIFLEX TK-3231 kiosk systems
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 8GB capacity expands POSIFLEX TK-3231 kiosk memory for heavier workloads
- DDR3 1333MHz PC3-10600 speed matches system specification for stable operation
- 35V low-voltage module reduces power draw in always-on terminals
- 204-pin SODIMM form factor fits the kiosk memory slot without adapters
- Non-ECC unbuffered design ensures direct compatibility with POSIFLEX Paragon Series motherboard
System-specific SODIMM for POSIFLEX TK-3231
This 8 GB DDR3 1333 module is built for the POSIFLEX TK-3231 Paragon Series kiosk. It fits the 204-pin SODIMM slot and runs at 1.35 V or 1.50 V without ECC or buffering. The single stick adds memory capacity to point-of-sale terminals that need a direct replacement.
Plug-and-play compatibility
The module uses major OEM chips from Samsung, Micron or Hynix and is stress-tested under load for stability. No extra software or drivers are required; installation follows the kiosk's own service manual. The 2Rx8 rank organisation matches the system's memory controller expectations.
Capacity and headroom
Eight gigabytes supports typical POS workloads such as transaction processing, inventory lookup and peripheral management. The CL9 latency and PC3-10600 bandwidth suit the platform's DDR3 1333 controller. Systems already at the board's maximum slot count or needing ECC registered memory cannot use this module.
Přednosti
- 8GB capacity expands POSIFLEX TK-3231 kiosk memory for heavier workloads
- DDR3 1333MHz PC3-10600 speed matches system specification for stable operation
- 35V low-voltage module reduces power draw in always-on terminals
- 204-pin SODIMM form factor fits the kiosk memory slot without adapters
- Non-ECC unbuffered design ensures direct compatibility with POSIFLEX Paragon Series motherboard
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Otázky k tomuto produktu
Will the 2Rx8 DDR3 SODIMM need any firmware updates or periodic reseating after installation?
No firmware updates are required for this Non-ECC Unbuffered module. Once seated in the 204-pin slot it remains stable for the system's service life.
What limit appears first when the POSIFLEX TK-3231 runs continuous workloads on this 8GB DDR3 1333 CL9 stick?
The 8GB capacity ceiling is reached before bandwidth or latency constraints, so sustained multitasking will hit the size limit first.
How much heat and power does the 1.35V 2Rx8 module add when the kiosk operates all day?
At 1.35V the module draws low power and produces minimal heat; no spreader is fitted because thermal output stays well within SODIMM limits.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 US$
0.00095315BTC
Skladem