Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM module

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 260-pin SODIMM POSIFLEX RT-5016 memory upgrade

SKU CH-A5FM-6772Z

8GB DDR4 2133 SODIMM adds responsive memory to POSIFLEX RT-5016 terminals

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity extends POS terminal multitasking headroom
  • DDR4 2133 speed matches POSIFLEX RT-5016 memory bus
  • CL15 latency keeps transaction processing responsive
  • 2 V operation reduces power draw in kiosk deployments
  • 260-pin SODIMM form factor fits the terminal slot

Compatible DDR4 SODIMM for POSIFLEX RT-5016

This 8GB DDR4 2133MHz module is built specifically for the POSIFLEX RT-5016 terminal. It operates at 1.2V with CL15 latency and uses a 260-pin SODIMM form factor. The memory is non-ECC and unbuffered, using major OEM chips for reliable operation in point-of-sale environments.

Suits single-slot upgrades.

This single 8GB stick works when the terminal has one free slot or when replacing an existing module. It will not provide dual-channel bandwidth because only one module is supplied. Buyers needing error-correcting code memory or registered DIMMs for server-grade hardware should look elsewhere.

PC4-17000 speed rating defines the upgrade path

The module runs at DDR4 2133 (PC4-17000), so the terminal must support this exact data rate. Installing faster DDR4 SODIMMs will typically downclock to 2133MHz, but slower modules will not operate correctly. Verify the system specifications list PC4-17000 before purchasing.

Přednosti

  • 8 GB capacity extends POS terminal multitasking headroom
  • DDR4 2133 speed matches POSIFLEX RT-5016 memory bus
  • CL15 latency keeps transaction processing responsive
  • 2 V operation reduces power draw in kiosk deployments
  • 260-pin SODIMM form factor fits the terminal slot

Specifikace

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

Otázky k tomuto produktu

Will the DDR4 SODIMM need replacement during the POS terminal's service life?

The 8 GB DDR4 2133 CL15 module is a solid-state component with no moving parts, so it does not require scheduled replacement under normal operation.

What limits continuous throughput when the terminal runs all day?

Sustained throughput is capped by the DDR4 2133 MT/s data rate and CL15 latency of the installed SODIMM.

How much heat does the 1.2 V SODIMM add in a fanless POS chassis?

Operating at 1.20 V without a heat spreader, the 2Rx8 module adds minimal thermal load suitable for fanless terminal designs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.