Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 2666 CL19 2Rx8 SODIMM POSIFLEX RT-2016-G2 memory upgrade

SKU CH-3HZZ-2S54X

8GB DDR4-2666 SODIMM module validated for POSIFLEX RT-2016-G2 terminals

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands terminal multitasking headroom
  • DDR4 2666 speed matches POSIFLEX RT-2016-G2 spec
  • CL19 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits the terminal slot
  • Built with major OEM chips for stable operation

POSIFLEX RT-2016-G2 compatible SODIMM

This 8 GB DDR4 module is built specifically for the POSIFLEX RT-2016-G2 terminal. It installs in a single 260-pin slot and runs at 2666 MHz with CL19 latency. The unbuffered, non-ECC design matches the system's original memory architecture exactly.

Sustained workload stability

Every module undergoes extended stress testing under load before it leaves the factory. The 1.2 V operating voltage and 2Rx8 organisation keep thermals predictable during long shifts in retail or hospitality environments. Major OEM DRAM from Samsung, Micron or Hynix provides the consistency required for always-on point-of-sale operation.

Upgrade path for single-slot terminals

Replaces a factory 4 GB stick or adds capacity to an empty slot in the RT-2016-G2. The jump is worthwhile when the terminal runs multiple POS applications, browser-based dashboards or local databases that push the original memory ceiling. Not suited for systems that require ECC, registered DIMMs or DDR5 memory.

Přednosti

  • 8 GB capacity expands terminal multitasking headroom
  • DDR4 2666 speed matches POSIFLEX RT-2016-G2 spec
  • CL19 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits the terminal slot
  • Built with major OEM chips for stable operation

Specifikace

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Otázky k tomuto produktu

Does the 1.2 V DDR4 2666 SODIMM run hot or loud inside a POSIFLEX RT-2016-G2 terminal?

The module operates at 1.20 V without a heat spreader and has no moving parts, so it adds negligible heat and makes no noise during continuous use.

What must the POSIFLEX RT-2016-G2 already have for this 260-pin CL19 kit to work?

The terminal needs a free DDR4 SODIMM slot that accepts 2Rx8 unbuffered non-ECC memory at 2666 MT/s.

Will this PC4-21300 2Rx8 stick work alongside the original memory in my RT-2016-G2?

Yes, provided the existing module is also DDR4 2666 non-ECC unbuffered; the system will run both at the lower common speed and latency.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.