Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular circuit board with black memory chips, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2933 PC4-23400 CL21 1Rx8 288-Pin UDIMM memory upgrade

SKU CH-36GA-ZSTGB

8GB DDR4 2933 CL21 UDIMM for Supermicro workstations, 1.2V unbuffered non-ECC with major OEM chips

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity adds responsive multitasking headroom
  • DDR4 2933 speed feeds data to the CPU faster
  • 2 V operation keeps system power draw low
  • CL21 latency reduces wait cycles per request
  • Validated for Supermicro C9Z490-PG and C9Z490-PGW workstations

NEMIX RAM 8GB DDR4 2933 UDIMM

This 8GB DDR4 module runs at 2933 MT/s with a CL21 latency and 1.20V operating voltage. It uses a 288-pin UDIMM form factor and 1Rx8 rank organisation without ECC or a heat spreader. The kit is built for Supermicro desktop and SuperWorkstation platforms including the MBD-C9Z490-PG and MBD-C9Z490-PGW boards.

Suits Supermicro DDR4 2933 slots needing a single

Buyers whose motherboard requires registered or ECC memory should look elsewhere. Systems that only accept DDR5 modules cannot use this product. Builders needing a multi-module kit or capacities beyond 8GB per slot must choose a different configuration.

Deciding specification: DDR4 2933 non-ECC

The module fits only boards that support DDR4 2933 unbuffered non-ECC UDIMMs. Verify the motherboard manual lists this exact speed and type before purchase. If the platform demands ECC, registered DIMMs or a different DDR generation the memory will not work.

Přednosti

  • 8 GB capacity adds responsive multitasking headroom
  • DDR4 2933 speed feeds data to the CPU faster
  • 2 V operation keeps system power draw low
  • CL21 latency reduces wait cycles per request
  • Validated for Supermicro C9Z490-PG and C9Z490-PGW workstations

Specifikace

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K1
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM

Otázky k tomuto produktu

Should I choose the 8GB single module or look for a kit with multiple sticks?

This listing is an 8GB single UDIMM rated DDR4 2933 CL21 1Rx8. If your Supermicro board has free slots you can add one module now and match another identical stick later for dual-channel bandwidth.

What does the 2933 MT/s rating deliver once the module is installed in a Supermicro workstation?

The module runs at DDR4 2933 (PC4-23400) with CL21 latency at 1.2 V, giving the rated throughput and timing the platform expects for stable operation in the supported Supermicro systems.

Does the 288-pin DDR4 UDIMM interface limit the speed or capacity I can use?

The 288-pin unbuffered non-ECC UDIMM form factor is the standard desktop DDR4 interface; it accepts the 2933 MT/s rating and 8 GB capacity of this module without further restriction from the slot itself.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.