NEMIX RAM
NEMIX RAM CSE-E101-04 64GB (2x32GB) DDR5 4800 CL40 SODIMM memory upgrade
64 GB DDR5 SODIMM kit (2 × 32 GB) at 4800 MT/s, CL40, 1.1 V, validated for Supermicro SuperServer SYS-E100-13AD-E
- Capacity64GB (2 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity for demanding server workloads
- DDR5 4800 MT/s speed with CL40 latency for responsive performance
- 1 V low-voltage operation reduces system power draw
- 262-pin SODIMM form factor fits Supermicro IoT SuperServer SYS-E100-13AD-E
- Rigorously stress-tested modules ensure stability in mission-critical environments
Capacity and fit
This kit supplies 64GB across two 32GB DDR5 SODIMM modules built for the SuperMicro IoT SuperServer SYS-E100-13AD-E and related X13SAN-E boards. It targets administrators who need the maximum supported memory in that platform without mixing ranks or speeds.
Speed ceiling
DDR5 4800 sets the data rate at 4800 MT/s with CL40 latency, so throughput is bounded by that JEDEC baseline rather than higher factory profiles. The 1.1V operating voltage is fixed by the standard, leaving no headroom for manual overclocking on locked server BIOSes.
Physical layout
Each stick uses a 262-pin edge connector and a 2Rx8 organisation without a heat spreader, so the modules sit low enough for dense 1U trays but expose the DRAM packages directly to chassis airflow. The unbuffered non-ECC design means the memory controller handles all error detection, which is acceptable for the validated SuperMicro configurations but rules out ECC-dependent workloads.
Přednosti
- 64 GB total capacity for demanding server workloads
- DDR5 4800 MT/s speed with CL40 latency for responsive performance
- 1 V low-voltage operation reduces system power draw
- 262-pin SODIMM form factor fits Supermicro IoT SuperServer SYS-E100-13AD-E
- Rigorously stress-tested modules ensure stability in mission-critical environments
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT |
Otázky k tomuto produktu
Should I pick the 64 GB kit or a smaller capacity for the SuperMicro SYS-E100-13AD-E?
The kit provides 64 GB total as two 32 GB modules, matching the dual-channel layout of the SYS-E100-13AD-E for full bandwidth.
What does the 4800 MT/s rating deliver in the SuperServer once installed?
The modules run at DDR5 4800 (PC5-38400) with CL40 latency, giving the peak transfer rate the platform's memory controller supports.
Will the 262-pin SODIMM interface fit the X13SAN-E motherboard slots?
Yes, the 262-pin DDR5 SODIMM form factor is the exact slot type used on the X13SAN-E and X13SAN-E-WOHS boards.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



