NEMIX RAM
NEMIX RAM DDR5 256GB 2x128GB 6400 CL52 1.1V 2Rx4 RDIMM ECC Supermicro H13SSL-N memory upgrade
A 256 GB DDR5 registered ECC kit with two 128 GB modules running at 6400 MT/s, CL52 and 1.1 V, validated for the Supermicro H13SSL-N motherboard
- Capacity256GB (2 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB total capacity from two 128 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth out of the box
- Registered ECC RDIMM design offloads the memory controller and corrects single-bit errors
- 1 V operation at 2Rx4 rank matches the motherboard's electrical spec exactly
- Validated for Supermicro H13SSL-N with 288-pin RDIMM form factor and population rules
Exact-match DDR5 256 GB kit for Supermicro H13SSL-N
This 256 GB kit contains two 128 GB registered ECC RDIMMs built to the DDR5 6400 standard. It is intended for administrators upgrading a Supermicro H13SSL-N motherboard that requires registered memory. The modules operate at 1.10 V with a CAS latency of 52.
Capacity and headroom at 6400 MT/s
The dual-rank 2Rx4 organisation lets each DIMM present 128 GB, giving the board 256 GB total when both slots are populated. Registered buffering allows the memory controller to drive every slot at the rated 6400 MT/s without signal degradation. Systems needing more than 256 GB will require a motherboard with additional DIMM slots.
Build quality and daily implications
Major-brand Samsung, Micron or Hynix ICs are used without heat spreaders, relying on server chassis airflow for cooling. The 288-pin RDIMM form factor fits only registered DIMM slots; it will not work in unbuffered or SODIMM sockets. Verify the board's population rules before installation to ensure correct slot order.
Přednosti
- 256 GB total capacity from two 128 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth out of the box
- Registered ECC RDIMM design offloads the memory controller and corrects single-bit errors
- 1 V operation at 2Rx4 rank matches the motherboard's electrical spec exactly
- Validated for Supermicro H13SSL-N with 288-pin RDIMM form factor and population rules
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Will this 2Rx4 DDR5 6400 RDIMM kit run at full speed alongside existing 1Rx8 modules in a Supermicro H13SSL-N?
The kit is 2Rx4 Registered ECC at 1.10 V CL52; matching rank, voltage and timing is required for full-speed operation, so check the motherboard manual for approved population rules before mixing ranks.
How can I confirm the 256 GB kit is detected at DDR5 6400 with ECC active after installation?
Enter the BIOS and verify total memory shows 256 GB, speed reads 6400 MT/s, and ECC status is enabled; then run a memory diagnostic that reports corrected errors to prove ECC is functioning.
Does the MR51200-724K2 box include only the two 128 GB RDIMMs or are heat spreaders and cables also supplied?
The package contains the two 128 GB 288-pin DDR5 RDIMM modules only; no heat spreaders, cables or additional accessories are included.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



