Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Six green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 4800 192GB 6x32GB CL40 1.1V 2Rx8 ECC Registered RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-R93V-XMED5

192 GB DDR5-4800 ECC registered kit in six 32 GB modules, CL40 at 1.1 V, validated for Supermicro H13SSL-NT servers

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Zobrazit dalších 24 konfigurací
  • 192GB total capacity across six 32GB modules for maximum server memory density
  • DDR5-4800 speed with CL40 latency delivers rated performance on Supermicro H13SSL-NT
  • Registered ECC architecture corrects single-bit errors and stabilizes fully populated configurations
  • 1V operating voltage matches platform requirements for efficient power draw
  • 288-pin RDIMM form factor ensures exact mechanical and electrical fitment

Exact-match server upgrade

This 192GB kit contains six 32GB DDR5 RDIMM modules rated at 4800MHz with CL40 latency and 1.1V operation. Registered ECC architecture delivers the error correction and signal buffering required by the Supermicro H13SSL-NT motherboard. The 2Rx8 rank structure matches the board's memory controller expectations for full-capacity recognition.

Built for populated server boards

Suits administrators who need every DIMM slot filled with validated registered memory that runs at rated speed without manual tuning. Not for systems that accept only unbuffered UDIMMs or SODIMM form factors. Not for platforms limited to lower maximum capacities per slot or different voltage requirements.

Fits Supermicro H13SSL-NT population rules

The 288-pin RDIMM form factor installs directly into the motherboard's DDR5 slots following the manufacturer's population order. Registered buffering reduces electrical load on the memory controller when all channels are fully populated. ECC functionality operates automatically once the modules are seated and the system boots.

Přednosti

  • 192GB total capacity across six 32GB modules for maximum server memory density
  • DDR5-4800 speed with CL40 latency delivers rated performance on Supermicro H13SSL-NT
  • Registered ECC architecture corrects single-bit errors and stabilizes fully populated configurations
  • 1V operating voltage matches platform requirements for efficient power draw
  • 288-pin RDIMM form factor ensures exact mechanical and electrical fitment

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What motherboard must I already have for this 192GB DDR5-4800 kit to work?

The kit is verified for the Supermicro H13SSL-NT motherboard and requires its 288-pin RDIMM slots.

How do these 2Rx8 Registered ECC DDR5 modules behave alongside other DDR5 RDIMMs I may keep?

Mixing ranks or speeds can force the controller to run all slots at the lowest common speed; populate identical modules per channel for full DDR5-4800 operation.

How can I confirm the 192GB kit is running at DDR5-4800 CL40 1.1V after installation?

Enter the BIOS or use a tool such as dmidecode to verify each DIMM shows 4800 MT/s, CL40 timings and 1.1 V with ECC active.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.