Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 1TB 16x64GB Supermicro H14DSG-OM memory upgrade

SKU CH-1P7D-AF02A

A 1TB kit of sixteen 64GB DDR5 4800 registered ECC RDIMMs at 1.1V CL40, validated for the Supermicro H14DSG-OM motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 1TB total capacity for dense workloads with 16 x 64GB modules
  • DDR5 4800 speed matches server controller specs for rated performance
  • ECC registered design corrects single-bit errors preventing data corruption
  • 2Rx4 rank and 1.1V voltage align with motherboard population rules
  • Verified fitment for Supermicro H14DSG-OM with 288-pin RDIMM form factor

NEMIX RAM 1TB DDR5 ECC RDIMM Kit

This 1TB kit contains sixteen 64GB DDR5 4800 RDIMM modules built for the Supermicro H14DSG-OM motherboard. Registered ECC architecture delivers the stability required by production servers running critical workloads.

Who This Suits and Who Should Look Elsewhere

Suits administrators upgrading a H14DSG-OM platform to its full 1TB registered memory capacity with matched 2Rx4 modules. Not for systems that require unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or speeds beyond the DDR5 4800 specification.

Capacity and Headroom

Sixteen 64GB modules populate every slot to reach the 1TB maximum this board supports at DDR5 4800 CL40. Headroom ends at the platform's registered DIMM limit; larger per-module capacities or faster speeds are not supported by this motherboard.

Přednosti

  • 1TB total capacity for dense workloads with 16 x 64GB modules
  • DDR5 4800 speed matches server controller specs for rated performance
  • ECC registered design corrects single-bit errors preventing data corruption
  • 2Rx4 rank and 1.1V voltage align with motherboard population rules
  • Verified fitment for Supermicro H14DSG-OM with 288-pin RDIMM form factor

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What motherboard and DIMM slots are required for this 16-module 1 TB DDR5 4800 RDIMM kit?

The kit is built for the Supermicro H14DSG-OM motherboard, which must provide 288-pin DDR5 RDIMM slots; the system manual lists the exact population order for all 16 modules.

Will the Supermicro H14DSG-OM run at the rated DDR5 4800 speed when all 16 slots are filled with these 2Rx4 Registered ECC DIMMs?

Yes, the modules match the board's specified rank, voltage (1.1 V), and CL40 timing so the memory controller recognises the full 1 TB at DDR5 4800 without down-clocking.

How can I confirm the kit is operating correctly after installation?

Boot the server, enter BIOS or your OS memory utility, and verify that all 16 DIMMs show 64 GB each at DDR5 4800 (PC5-38400), 1.1 V, CL40 with ECC active and no correctable-error counts climbing.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.