Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 256GB 16x16GB CL40 1.1V Supermicro H14DST-F memory upgrade

SKU CH-MYNE-6F8Y4

A 256 GB DDR5 4800 ECC registered kit of sixteen 16 GB modules at CL40 and 1.1 V, built for the Supermicro H14DST-F

  • Capacity256GB (16 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from a 16-module kit of 16 GB each
  • DDR5 4800 speed with CL40 latency for rated server performance
  • ECC registered RDIMM architecture prevents data errors under full load
  • 1 V operation matches the Supermicro H14DST-F memory controller exactly
  • 288-pin RDIMM form factor fits the board's memory slots without adapters

Exact DDR5-4800 Registered ECC Kit

This 256GB kit contains sixteen 16GB DDR5 RDIMMs rated at 4800 MT/s with CL40 latency and 1.1V operation. It targets administrators upgrading a Supermicro H14DST-F server that requires registered ECC memory to run every slot at full capacity.

RDIMM Population Rules Apply

The motherboard dictates how many modules it accepts per channel and in which order they must be installed; exceeding those limits prevents the system from booting. Registered buffering lets the memory controller drive all sixteen slots, but only the board's qualified-vendor list confirms which capacities and ranks are supported.

Major-Brand Chips Without Heat Spreaders

Samsung, Micron or Hynix ICs are used depending on supply, and the modules ship bare without heat spreaders to fit dense server chassis airflow paths. The 288-pin RDIMM keying prevents accidental insertion into UDIMM or SODIMM slots, ensuring mechanical compatibility with the target platform.

Přednosti

  • 256 GB total capacity from a 16-module kit of 16 GB each
  • DDR5 4800 speed with CL40 latency for rated server performance
  • ECC registered RDIMM architecture prevents data errors under full load
  • 1 V operation matches the Supermicro H14DST-F memory controller exactly
  • 288-pin RDIMM form factor fits the board's memory slots without adapters

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K16
Capacity256GB (16 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 16X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I choose the 16 x 16 GB kit or a different capacity for my Supermicro H14DST-F?

This 256 GB kit uses 16 modules of 16 GB each, matching the board's 16 DIMM slots and 1Rx8 rank requirement for full-speed operation.

What does DDR5 4800 actually deliver once installed in the H14DST-F?

The modules run at 4800 MT/s with CL40 latency at 1.1 V, giving the rated PC5-38400 bandwidth when the memory controller is fully populated.

Is the 288-pin RDIMM interface the right fit and what speed ceiling does it impose?

The 288-pin registered DIMM form factor is exactly what the H14DST-F requires; it supports the kit's 4800 MT/s rating without downclocking.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.