Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM DDR5 5600 288GB 6x48GB ECC RDIMM CL46 1.1V Supermicro H13SSF memory upgrade

SKU CH-DW2W-76PPW

A 288 GB DDR5 ECC registered memory kit with six 48 GB modules at 5600 MHz, CL46 and 1.1 V, validated for the Supermicro H13SSF motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 288 GB total capacity from six 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • 1 V operation matches server memory-controller requirements
  • Registered ECC RDIMM design prevents single-bit data errors
  • Verified fit for Supermicro H13SSF motherboard

288GB DDR5-5600 RDIMM kit for Supermicro H13SSF

This 288GB kit contains six 48GB DDR5-5600 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13SSF memory controller expects. It is designed for administrators who need the full 288GB capacity recognised at rated speed without manual tuning.

Registered ECC stability under sustained load

The registered architecture buffers each command so all six slots run fully populated at 5600 MT/s and 1.1V without overloading the controller. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during long-running workloads.

Replaces smaller or mixed-capacity DDR5 RDIMM sets

Install this kit when the current configuration cannot reach 288GB or uses mismatched ranks that force the board to downclock. The jump is worth it when the workload demands the full registered-ECC capacity at the native 5600 MT/s data rate.

Přednosti

  • 288 GB total capacity from six 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • 1 V operation matches server memory-controller requirements
  • Registered ECC RDIMM design prevents single-bit data errors
  • Verified fit for Supermicro H13SSF motherboard

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Otázky k tomuto produktu

How much heat and power does the 1.1V DDR5 5600 kit draw when the H13SSF runs fully populated all day?

Each 48 GB module operates at 1.1 V and DDR5-5600 speed. Registered architecture reduces electrical load on the memory controller, and the modules have no heat spreader, so airflow through the chassis handles cooling.

What must the Supermicro H13SSF already provide for this 6-module 288 GB kit to function?

The board needs six free 288-pin DDR5 RDIMM slots that support registered ECC memory, 2Rx8 organisation, 1.1 V operation and DDR5-5600 (PC5-44800) speed. The population order in the manual must allow all six slots to be filled.

Will the H13SSF run at DDR5-5600 CL46 with all six slots populated alongside any existing RDIMMs?

The kit is spec-matched to the H13SSF memory controller for 2Rx8 registered ECC at 1.1 V, CL46 and DDR5-5600. When the board's population rules are followed, the controller recognises the full 288 GB at rated speed without down-clocking.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.