Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular DDR5 memory module with gold edge connector and black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 64GB 2Rx4 CL46 1.1V ECC RDIMM Supermicro X14SDW-36C-SP9F memory upgrade

SKU CH-3JGA-H3S7F

64 GB DDR5 5600 ECC registered RDIMM validated for the Supermicro X14SDW-36C-SP9F motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

  • 64 GB capacity lets your server handle larger workloads without swapping
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth the motherboard expects
  • Registered ECC architecture corrects single-bit errors and supports full-slot populations
  • 1 V CL46 timing matches the board's memory-controller requirements exactly
  • 288-pin 2Rx4 RDIMM form factor fits the Supermicro X14SDW-36C-SP9F motherboard

Exact DDR5-5600 64GB ECC RDIMM for Supermicro

This 64GB module is a registered DDR5-5600 (PC5-44800) ECC RDIMM built to the precise rank, voltage and timing the Supermicro X14SDW-36C-SP9F motherboard expects. It uses a 2Rx4 organisation, CL46 latency and 1.10V operation so the memory controller recognises the full capacity at rated speed. The 288-pin registered form factor matches the board's DIMM slots and population rules.

Thermals noise and power draw in normal use

Registered buffering reduces electrical load on the memory controller, allowing every slot to run fully populated at the rated 5600 MT/s without signal degradation. Operating at 1.10V keeps power draw low for a 64GB density, and the module has no heat spreader, relying on chassis airflow for cooling. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads.

Upgrade path from smaller or unbuffered DDR5 modules

Replacing lower-capacity RDIMMs or non-ECC UDIMMs with this kit adds 64GB per slot while keeping registered signalling and error correction the platform requires. The jump is worth it when your workloads need maximum per-slot density and data integrity at the board's native DDR5-5600 speed. Always consult the motherboard manual for supported capacities and approved population order before installation.

Přednosti

  • 64 GB capacity lets your server handle larger workloads without swapping
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth the motherboard expects
  • Registered ECC architecture corrects single-bit errors and supports full-slot populations
  • 1 V CL46 timing matches the board's memory-controller requirements exactly
  • 288-pin 2Rx4 RDIMM form factor fits the Supermicro X14SDW-36C-SP9F motherboard

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install this 64GB DDR5 5600 RDIMM in the Supermicro X14SDW-36C-SP9F and what step is often missed?

Power down, open the chassis, and insert the 288-pin module into the slot the manual specifies for your population order; the step most people miss is checking that manual first to confirm the exact DIMM sequence for 2Rx4 registered ECC.

What maintenance or replacement will this NEMIX RAM MR44800-924K1 kit need over its service life?

No scheduled maintenance is required; if a module fails, the lifetime replacement warranty covers a swap, and ECC corrects single-bit errors on the fly to prevent silent data corruption.

What limit appears first when this 1.1V CL46 2Rx4 registered memory runs sustained workloads on the X14SDW-36C-SP9F?

The memory controller's maximum supported capacity and population rules for registered DDR5 5600 are the first constraints; consult the motherboard manual for the exact per-slot and total limits.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.